JP1 Remotes

[siulungchow]

Hi , I need I-O data HVTR-BTL IR code for slingbox , how can I get that one , thanks lot !!

[alanrichey]

Afraid I can't help as that model is not in the Logitech Harmony IR database. The closest they have is the IOData HVR-HD but that does not many functions defined (No numbers for example),

I take it the IOData box in the File Section doesn't work ?

[vickyg2003]

Alan we have a special protocol and a KM upgrade in the file section for the iodata btl.

IODATA HVT-BT200
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6955

[siulungchow]

I try to download HVR-HD for test , power and channel up & down it's work


Regarding IODATA HVT-BT200 , it's TXT file , how can I convert to Binary Files ?

[alanrichey]

You ask me to convert it

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12147

Any use ?

[siulungchow]

thanks lot !!

[alanrichey]

I assume from that it works ?

[siulungchow]

un… basic function it's work (power and channel up&down) , but I-O data have special function function is "channel" in their remote control , the number key in I-O data 's remote control function is [quick channel function]

Example if Press 1 , it will jump to first channel (might be channel number is 101) . Press 2 go 2nd of channel (might be channel number is 102) , Similar quick key . if you need jump to channel #200 , you must press "channel" key then just can use number key to press 200 for change channel . , So for now , I only can use l up & down to control the channel change .

anyway , It really help me lot , thanks again for help !!

[chuliu]

Hi
If you are using sling box pro hd or above, I think hvtr-btl is supported by sling box. You just need to select japan as the region for slingbox and search for its remote.


http://www.slingbox.jp/support/remote/

[ykchiang]

[alanrichey]

All the Slingboxes use the same IR database so the model is irrelevant.

[ykchiang]

Hi Alan Richey

Thanks for your reply.
I have another device ( HVTR-BTCL ) it is suported by the update as link
http://answers.slingbox.com/community/whats-new/blog/2012/08/08/new-remotes-added
I try to found the IO Data manufactured in my slingbox setup assistant, but I cannot found it
The following is my step by step.

Step1. open setup assistant in slingplay 2.0.4
Step2. Select Setup your Slingbox -> setup my country as Japan
Step3. Select Configure Video Sources -> Composite -> Satellite Reciever -> The IO-Data does not show in the list.

the following img url is the screen capture.
http://imgur.com/koO276o

Thanks.

[alanrichey]

You are right, my apologies. I couldn't find it on my Classic either. What I did was installed it on my Pro-HD and analysed the signals and built you a Custom Remote. I'm not 100% confident as this device uses a unique IR protocol, and whoever built the official remote must have been drunk. He/She missed a lot of buttons and mapped some of the others apparently randomly.

Give it a try. If using the installation instructions does not give you a realistiic remote let me know,

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12431

[alanrichey]

Any news. This took me a VERY long time, I would hate to think it was all wasted.

[ykchiang]

Sorry for late reply.
My device have some problems( cannot receive satellite signal), I will try to solve it this week when I near the device.
I will reply about 3/30.
Sincerely.