View previous topic :: View next topic |
Author |
Message |
nw
Joined: 10 Jul 2010 Posts: 30
|
Posted: Fri Oct 18, 2013 1:48 am Post subject: Vizio E470i / Vizio E500i HDTV Television |
|
|
1. Device: Vizio E470i / Vizio E500i (aka E470i-A0 / Vizio E500i-A1 / Vizio E-Series )
2. Type of device: HDTV Television
3. Year: 2012
4. JP1/UEI Remote model: RCA RCRP05B
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? huh ?
9. Partially working setup code? Yes, TV/1758
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? not sure
Sorry I have completely forgotten how to do extended key codes on this remote, been over a year since I fiddled with it and no cable.
The RCA code 1758 does about 80% setup on this remote.
I'd rather use real codes if possible rather than teach it from the original and waste memory.
It is missing two critical sets of buttons:
1. the forward, back pause, stop controls
2. the universal menu button
now the menu button is mentioned in the other vizio thread and linked here:
http://www.remotecentral.com/cgi-bin/forums/viewpost.cgi?1059132
EFC = 42, Function/OBC = 79
but I apologize as I have no clue how to use that info as an extended key code to program the RCRP05B
As far as the forward/back/play/stop buttons, I believe Vizio has nearly universal codes that work on all models for the past few years (as far as IR) because they sell single replacements that work on all models.
I see a couple of "generic" files for vizio on remotecentral and then there is this E500-A1 listed here but I have no idea how to extract the codes from it?
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11917
Many thanks for any assistance. |
|
Back to top |
|
|
nw
Joined: 10 Jul 2010 Posts: 30
|
Posted: Fri Oct 18, 2013 2:45 am Post subject: |
|
|
Okay after much more reading and remembering, apparently what I am asking for is the 9XX code.
But I am not sure how to use that 42 / 79 code ?
So I press TV
Press and hold SETUP until it flashes twice
Press 994
Press SETUP
(now what do I do here with 42 / 79 since it wants a 3 or 5 digit code?)
Press button to assign the menu code to
OH ! I see, I just pre-pad the EFC with zeros if it is too short for 5 digits.
So 42 becomes 00042
Now to see if 42 really is menu for this model.
IT WORKS ! Yes !
Now that I know 00042 is right for this model I guess I can search for the other key codes.
Thank you to everyone for the wealth of knowledge on this site.
I still need to figure out the play/stop/forward/reverse buttons - I see a E500 file in the files section but the codes in there don't see to correspond, ie. the menu for that one says 0D which is "15" and not 42 so those aren't 9XX codes?
What's interesting is the channel up/down button doesn't work either, though virtually every other button works like volume and input and the directional buttons. I wonder if I should try the TV/1756 code.
Aha! I figured out how to use remote-master to load the E500-A1 file and now I can see all the EFC codes which were not obvious when looking directly at the rmdu file
Successfully fixed the channel up/down buttons!
Will do the rest later. This is fantastic. |
|
Back to top |
|
|
nw
Joined: 10 Jul 2010 Posts: 30
|
Posted: Fri Oct 18, 2013 3:47 am Post subject: |
|
|
Just to help the next person, the EFC codes for Vizio E470 / E500
Code: |
0 00117
1 00121
2 00119
3 00123
4 00116
5 00120
6 00118
7 00122
8 00245
9 00249
vol up 00183
vol down 00187
mute 00057
channel up 00181
channel down 00185
power 00053
menu 00042
OK 00164
guide 00244
up arrow 00168
down arrow 00166
left arrow 00170
right arrow 00037
sleep 00054
Back 00039
Input 00090
play 00155
pause 00154
rewind 00152
fast fwd 00150
stop 00149
record 00148
exit 00041
Vizio 00088
Wide 00138
Skip_back 00247
CC 00025
On 00087
Off 00216
Dash 00018
Info 00251
yellow (A) 00103
blue (B) 00107
red (C) 00100
green (D) 00104
HDMI 1 00193
HDMI 2 00191
HDMI 3 00195
HDMI 4 00188
AV 1 00225
TV Input 00110
media 00141
amazon 00079
netflix 00083
m-go 00080
|
|
|
Back to top |
|
|
nw
Joined: 10 Jul 2010 Posts: 30
|
Posted: Fri Oct 18, 2013 12:06 pm Post subject: |
|
|
Now to try to figure out if I can code the previous/next buttons.
The original vizio remote does not have those keys but there are other keys the television supports which are not on the basic remote (like alphanumeric)
I guess I will look at other video remotes for hints, like their premium M-series.
Looks like the Vizio XRU300 has previous/next.
Looks like Vizio VCRs share the same play/pause/stop/ff/rewind codes and they have
next track 00151
prev track 00086
So will try those. |
|
Back to top |
|
|
pbc
Joined: 13 Apr 2012 Posts: 52 Location: Canada |
Posted: Fri Jul 29, 2016 7:42 am Post subject: |
|
|
This is great .... any chance you have located the HDMI 5 code (have a new 2016 P Series). |
|
Back to top |
|
|
pbc
Joined: 13 Apr 2012 Posts: 52 Location: Canada |
Posted: Fri Jul 29, 2016 7:46 am Post subject: |
|
|
Also, any discretes for the various Pic modes? E.g. Calibrated, Calibrated Dark? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
|
Back to top |
|
|
pbc
Joined: 13 Apr 2012 Posts: 52 Location: Canada |
Posted: Fri Jul 29, 2016 11:11 am Post subject: |
|
|
That's too bad about the picture modes (will see if Vizio's CTO knows whether there are any!). Thanks for the other codes! |
|
Back to top |
|
|
|