JP1 Remotes

Subject: Slingbox Pro HD Remote bin file for TM Single OE

1. Device: Technomate Satellite receiver
2. Type of device: DVB S2 Sat Receiver
3. Year: 2012
4. JP1/UEI Remote model: Unknown
5. Do you have a JP1 cable? No
6. Still have original remote? Yed
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything
12. Have tried all avilable bin files on JP1 for Technomate
13. Also have tried both PL & RV bin files & pl only - no joy
14. Have read a lot of sites but still no success

Thanks Don

corkgirl wrote:12. Have tried all avilable bin files on JP1 for Technomate
13. Also have tried both PL & RV bin files & pl only - no joy
14. Have read a lot of sites but still no success

Thanks Don

This one was tucked away in the archives. This is an unproven upgrade. It was created but never given a final okay by the enduser. Did you happen to try this? It is a different signal than the other technomate upgrades and worth checking out while you wait for alan.
https://www.hifi-remote.com/forums/dload ... e_id=11821

THANKS I will try it and let you know.

Regards

Don

I tried that file on a TM Single OE and a TM Twin OE and unfortunately it was unsuccessful.

Thanks for you help. Hopefully I will have a positive result.

Regards

Don

Hmm, perhaps Alan can do something with the Technomate Twin, I couldn't find the Single, but the Twin was listed in the Harmony Component check.

@ vickyg2003

I sourced the bin file for the TM Twin OE & all works with the use of some custom keys
Unfortunately, have not been as successful with the bin file for the TM SINGLE OE.

If Alan should see this I really would appreciate it if he could try it out.

Thanks again for your help.
Regards Don

Morning both Unfortunately I'm not sure i can help. As Vicky said, the TWIN OE is in the Harmony database, but you seem to have cracked that one. There is no sign of a Single OE and if I try that the database just recommends the Twin OE.

And looking at my records I have built 8 Technomate Custom Remotes and there are no common signals between them, all different. So that doesn't give us a clue.

Sorry

So we need a signal sample. In the past we would have recommended an IR widget, but right now nobody is supplying them. With a widget, we can just read the IR signals out of the air, and create a bin from them.

Does your technomate Single respond to any universal remotes you have around?

Sorry for slow response.

I am trying various makes and models , also when setting up the Slingbox the setup assistant offered 593 remote codes and yes for my sins I did try every single one. I have checked the IR emitters / blasters thru a camera and all working fine.

But one thing I havent tried is just using the RV.bin file as I am across the pond in Ireland and I purchased the Pro HD in the UK, so I am going to try the Twin OE again , only this time with the RV file { pal} and I will report back.

With regard to a URC , I have not checked yet, but if the above fails I will try that out.

Thanks again to Vicky and Al

Could you contact Technomate and ask them for it timing data? Sometimes manufactures will give you pronto hex or other documents that can be read by ir experts. If we know what signals .

Sure I can, can you tell me exactly what I need to ask for. Not trying to sound stupid.

Thanks

Donal

Contact support and tell them that you are trying to get information to program your slingbox remote.

You need the remotes infrared timing data for their TM single oe. Tell them you can work with
pronto hex,
a lirc file,
Or any timing data with a hex or binary representation of the commands.

Many enlightened manufacturers will give you the information. Others will simply ignore your request. It can't hurt to ask.

corkgirl wrote:But one thing I havent tried is just using the RV.bin file

Don't bother, the ProHD uses the PL Chipset regardless of origin.