JP1 Remotes

Hello all!
I am having trouble getting remote functionality to work properly on a Slingbox in Portugal, it moves 2 spaces instead of 1 when using the arrow controls.

-PACE DCR7151/24 is the STB (which was not in the Slingbox setup)
-Downloaded Pace DCR 8151-24 and Pace DCR-712 from JP1 – both seem to work, but they have the skipping problem.
-And just to clarify…When I hit the number 2, it registers as 2, not 22. However when I am in the "Menu" or "On Demand" section and try to scroll up/down/side/side to movies it skips every other one.

Any suggestions?

Thanks in advance…

Solution found! It was the C2010_PL.bin file provided by Alan here for someone experiencing the exact same issue that ended up working:

http://answers.slingbox.com/message/55411#55411

I found this a little odd, seeing as how I saw an article on slingbox.com talking about how Slinboxes on the PAL standard will use RV.bin files. But I can't complain, it works!

PS - This was a PACE DCR7151/24 STB through ZON Iris

Let me know if anyone has any other questions...