JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

RMIR Xsight Support
Goto page Previous  1, 2, 3 ... 42, 43, 44
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Nevo and Xsight Remotes
View previous topic :: View next topic  
Author Message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3959

PostPosted: Thu Feb 22, 2018 8:52 pm    Post subject: Reply with quote

In Win 10 you'll probably have to manually fix the keys. Pre-updated firmware is a different key than post. That's why your other remotes work, but the old one doesn't. See the wiki for the exact changes you need to manually make.
Back to top
View user's profile Send private message
michaeljc70



Joined: 05 Feb 2016
Posts: 34

PostPosted: Thu Feb 22, 2018 9:02 pm    Post subject: Reply with quote

mdavej wrote:
In Win 10 you'll probably have to manually fix the keys. Pre-updated firmware is a different key than post. That's why your other remotes work, but the old one doesn't. See the wiki for the exact changes you need to manually make.


It says:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_80xx\XSIGHT.\Device Parameters]

Different Xsight and Nevo models have different PID's (8001, 8002, 8004, 8005, 8006, 8007, 8008, 8009 and 8011). But this key should get you close no matter what model since the VID is always the same (06E7).

How do I know which 80xx to use?
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3959

PostPosted: Thu Feb 22, 2018 9:26 pm    Post subject: Reply with quote

Change all of them.
Back to top
View user's profile Send private message
michaeljc70



Joined: 05 Feb 2016
Posts: 34

PostPosted: Fri Feb 23, 2018 10:50 am    Post subject: Reply with quote

mdavej wrote:
Change all of them.


I tried that and rebooted. It still doesn't recognize the remote. Should the remote screen light up when plugged into a PC?


Here is the script I used to update the registry:

Code:
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8001\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8002\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8004\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8005\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8006\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8006\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8007\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8008\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8009\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7&PID_8011\XSIGHT.\Device Parameters]
"SelectiveSuspendEnabled"=hex:00
"EnhancedPowerManagementEnabled"=dword:00000000
"AllowIdleIrpInD3"=dword:00000001
"LegacyTouchScaling"=dword:00000000
"WriteReportExSupported"=dword:00000001
"EnumerationRetryCount"=dword:00000000
"SymbolicName"="\\??\\USB#VID_06E7&PID_8006#XSIGHT.#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"
"DeviceSelectiveSuspended"=dword:00000001

Back to top
View user's profile Send private message
michaeljc70



Joined: 05 Feb 2016
Posts: 34

PostPosted: Fri Feb 23, 2018 10:57 am    Post subject: Reply with quote

michaeljc70 wrote:
mdavej wrote:
Change all of them.


I tried that and rebooted. It still doesn't recognize the remote. Should the remote screen light up when plugged into a PC?
...


Nevermind. Thanks for the help. It was actually the cable. I tried another cable and my PC recognized it.
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3959

PostPosted: Fri Feb 23, 2018 11:03 am    Post subject: Reply with quote

Good to hear. For future reference, all you have to change is the EnhancedPowerManagementEnabled key from 1 to 0. I always just type the new value manually, no complicated script required. Just make sure you change it on every key under VID_06E7. All that other stuff gets built automatically when you plug in a remote and doesn't need to change.
Back to top
View user's profile Send private message
J.P. Samson



Joined: 12 Apr 2019
Posts: 1
Location: Canada

PostPosted: Thu May 23, 2019 11:55 pm    Post subject: Limited Number of Characters on Soft Buttons for Activities Reply with quote

I've noticed that the labels on the soft buttons on my Xsight Color seem to be limited to, I believe, 13 characters for activities. This is less than the character limit for devices. Is this a hardware/firmware limitation of the remote control itself, or something to do with RMIR (v2.07 build 2)?

JP
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 3179
Location: Cambridge, UK

PostPosted: Fri May 24, 2019 3:50 am    Post subject: Reply with quote

There are no limits on length imposed by RMIR, so it must be imposed by the remote control itself.
_________________
Graham
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Nevo and Xsight Remotes All times are GMT - 5 Hours
Goto page Previous  1, 2, 3 ... 42, 43, 44
Page 44 of 44

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central