JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Uniden dth-310r satellite receiver
Goto page Previous  1, 2
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Fri May 03, 2013 12:56 pm    Post subject: Reply with quote

Hi
For some reason it is not letting me edit the value.
It says changing value of repeats when repeat type is forced will only be effective in build mode, ie when the assembler is empty.....
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3219

PostPosted: Fri May 03, 2013 2:01 pm    Post subject: Reply with quote

For this simple executor, you can do the following:
1) When you enter the Manual Settings window, click Show Assembly at the upper right. This will give a blank listing.
2) Change the repeats
3) Click Build. This will fill in the listing.
4) Click Assemble
5) Click OK.
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Fri May 03, 2013 2:20 pm    Post subject: Reply with quote

cool
I tried it and I think repeat of 3 will do the job.

Thanks.
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Mon May 06, 2013 12:42 pm    Post subject: Reply with quote

Hi
To follow up, I modified the repeat of my own rmdu with the settings in the previous post where lead in was 550,1650 and out 550,550 and lead out total 45650, frequency at 38.1. I tested it on my device and confirmed that it works.

Thanks.
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Mon May 06, 2013 12:46 pm    Post subject: Reply with quote

I have a question: how to get the binary code of the command as quick as possible? Do we really have to paste every recorded irp pattern into excel and manipulate it? It is a lot of work. The device code and sub device code, if any, are the same across all commands but the command code is different every button. That's where it is hard.

Thanks.
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Sat Aug 23, 2014 2:28 pm    Post subject: Reply with quote

Dear 3FG or Vicky,
I know this case is closed but I just wanted to practice:
If I want to do the uniden remote upgrade in 3FG's interpretation of the protocol, how can I do it?
I have trouble setting the bits/byte to greater than 8. In 3FG's IRP it states that device has 9 bits and function 8 bits.

Thanks.



3FG wrote:
This is a new IR protocol
Uniden IRP = {38k,550}<1,-1|1,-3>(4,-2,(F:7,D:9,1,-40)+) where the assignment of bits to D and F is a guess.

The Device number is 9> The OBCs are:
Code:
OBC - Function
00 - 0
01 - 1
02 - 2
03 - 3
04 - 4
05 - 5
06 - 6
07 - 7
08 - 8
09 - 9
10 - power
14 - info
15 - menu
16 - option
17 - up
18 - down
19 - left
20 - right
21 - ok
22 - exit
29 - mts
31 - zoom
38 - record
40 - recording
46 - guide
47 - play
48 - stop
50 - forward
51 - rewind
52 - f.forward
53 - f.rewind
56 - pause
71 - d
72 - blue
73 - red
74 - green
75 - yellow
77 - ch+
78 - ch-
81 - 11
82 - 12
84 - subtitles
86 - dtv
87 - bs/cs
88 - 100+
114 - link
This should be a fairly simple executor to write
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Sat Aug 23, 2014 7:03 pm    Post subject: Reply with quote

Hi
I managed to implement a new approach.
1 device byte 8 bits and 2nd device byte 1 bit, no LSB.
command byte 7 bits with LSB.

other setting similar to the old one.

device 1 code is therefore, 144, and device 2 code 0.

for example "power" is 0101000 10010000 0
reversing the first 7 bits to get command obc code 10,
the following 8 bits is 144 and the last bit is 0.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central