View previous topic :: View next topic |
Author |
Message |
malimuda
Joined: 06 Jan 2013 Posts: 3
|
Posted: Sun Jan 06, 2013 11:44 am Post subject: One For All learning problem |
|
|
O.k. I have a problem which is annoying. I have One For All URC-8610 universal remote controller and I am trying to use learning function for replacing my View Sonic VMP74 Full HD network media player remote (this remote is not in their Internet database). The problem is that although this universal remote reports that he has learned e.g. POWER button, he can not reproduce it properly (in other words - button is not working) !!! This is not the case for using learning function for other devices (e.g. Samsung TV remote ...). Does anyone have any idea what could be the problem and how to solve it? Thanks. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Jan 06, 2013 1:50 pm Post subject: |
|
|
This is a learnable signal. Its a Nec1 64.64 signal.
My guess is that you are not capturing the first part of the signal. *Make sure you have fresh batteries in both remotes.
*Darken the room, daylight and flourescent lights can play a part
*Make sure to start the learning on the learning remote, before you press the OEM
The first part of the signal is the most important part. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
malimuda
Joined: 06 Jan 2013 Posts: 3
|
Posted: Sun Jan 06, 2013 2:43 pm Post subject: One For All learning problem |
|
|
Thanks for the tip! However, after inserting new batteries and repeating the process 10 more times in dark room, OFA still did not learn well. Maybe I was not precise enough, ... the OFA remote says "Captured it!" - "Congratulations!" ... but the button do not work.
The same procedure with: LG TV, Samsung TV (2 models) and LG HDD video recorder went without any problem.
The problematic device is also CISCO Cable TV BOX (but this device is in the OFA database, so remote works with it). |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon Jan 07, 2013 9:46 am Post subject: |
|
|
Are you testing the command in device mode or activity mode? If you are in activity mode, you may not have the power button assigned to the viewsonic device. |
|
Back to top |
|
|
malimuda
Joined: 06 Jan 2013 Posts: 3
|
Posted: Mon Jan 07, 2013 12:31 pm Post subject: One For All learning problem |
|
|
I was in Device mode.
Finally, I have solved the problem and this method I have used could help somebody ... !!!
So, I have used my old universal remote (Ednet) to learn the POWER (and all other) codes from original VS remote. This universal remote never had problems with VS frequencies. Then, in the dark room, I have directed both remote controllers (Ednet and original VS) into One For All, and pressed respective buttons simultaneously. After several unsuccessful tries, OFA has finally learned all the codes!
I have to mention that no learning was possible using only single remotes (universal Ednet or original VS). All remotes had new batteries.
Problem is now solved but I still do not know why One For All needed this stereo-learning input. Any ideas? |
|
Back to top |
|
|
|