Tatung STB 2010 remote BIN file required Dubai

jedoha · Post by **jedoha** » Sun Dec 09, 2012 12:50 pm

I have set up slingbox solo in Dubai . I need a BIN file for custom remote, appreciate any help from the experts...this will then give Dubai users the slingbox facility

alanrichey · Post by **alanrichey** » Mon Dec 10, 2012 12:15 am

Have you tested this one ?

https://www.hifi-remote.com/forums/dload ... le_id=9817

jedoha · Post by **jedoha** » Mon Dec 10, 2012 10:51 am

Thank you Alan Richey, it works a treat

I did change the bin file name to CL2010_JB as my slingbox is European solo and I read somewhere that the JB was required. however, it may have worked without the change but I do not want to change anything now as all is good, thanks a million...John

alanrichey · Post by **alanrichey** » Mon Dec 10, 2012 11:17 am

In theory it should NOT have worked. You should never change the name of a BIN file as the code is held within the Binary as well. I am guessing that you got away with it becasue you left the 2010 intact and still included a 'C'.

And for future reference you also have your logic totally wrong, you should never believe what you read unless it is on this forum

The _PL suffix works with ALL Slingboxes except early European ones (Solo, AV & Classic) which require an _RV extension. The PL & JB chipsets use identical codes, which is why we don't bother issuing _JB ones.

Post by **The Robman** » Mon Dec 10, 2012 11:46 am

alanrichey wrote:you should never believe what you read unless it is on this forum

Very good advice!

JP1 Remotes

Tatung STB 2010 remote BIN file required Dubai

Tatung STB 2010 remote BIN file required Dubai

Dubai slingbox remote