JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Telesystem TS-7510 HD
Goto page Previous  1, 2, 3  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3529
Location: UK/USA

                    
PostPosted: Fri Nov 02, 2012 4:46 pm    Post subject: Reply with quote

Thanks, sorry to lumber you with it. If you just want to produce the hex codes I can build the RMDU file.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11461

Al
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Nov 02, 2012 4:53 pm    Post subject: Reply with quote

Here ya go...

LEARNED IRP DATA
# IRP Form
1 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA353510EF}; Alt leadout form: ^145m
2 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353500FF}
3 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353501FE}; Alt leadout form: ^145m
4 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m){A=0xCACA353502FD}
5 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353503FC}
6 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353504FB}
7 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m){A=0xCACA353505FA}
8 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353506F9}
9 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353507F8}
10 {38.6k,563,msb}<1,-1|1,-3>(A:23,1,-50.1m){A=0x3508F7}
11 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353509F6}
12 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353511EE}
13 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353512ED}
14 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353500FF}; Alt leadout form: ^145m
15 {38.5k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353501FE}
16 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m){A=0xCACA353502FD}
17 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353503FC}
18 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353504FB}
19 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:39,1,-131.1m){A=0x65651A9A82}
20 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353506F9}; Alt leadout form: ^145m
21 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m){A=0xCACA353507F8}
22 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353508F7}
23 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353509F6}
24 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA353537C8}; Alt leadout form: ^145m
25 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA353538C7}; Alt leadout form: ^145m
26 {38.5k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353511EE}; Alt leadout form: ^145m
27 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m){A=0xCACA353512ED}
28 {38.5k,564,msb}<1,-1|1,-3>(16,-8,A:39,1,-131.1m){A=0x65651A9A92}
29 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353542BD}
30 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA353534CB}; Alt leadout form: ^145m
31 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m){A=0xCACA353536C9}
32 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA353518E7}; Alt leadout form: ^145m
33 {38.5k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA353519E6}; Alt leadout form: ^145m
34 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353528D7}; Alt leadout form: ^145m
35 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m){A=0xCACA353527D8}
36 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353520DF}
37 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353523DC}; Alt leadout form: ^145m
38 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353524DB}; Alt leadout form: ^145m
39 {38.5k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA35351AE5}; Alt leadout form: ^145m
40 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA35356A95}
41 {38.5k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA353539C6}
42 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA35352CD3}; Alt leadout form: ^145m
43 {38.5k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA35353AC5}; Alt leadout form: ^145m
44 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA35352AD5}; Alt leadout form: ^145m
45 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA35352DD2}
46 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.0m)+{A=0xCACA353510EF}; Alt leadout form: ^145m
47 {38.5k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA35353FC0}
48 {38.3k,564,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m)+{A=0xCACA35356C93}; Alt leadout form: ^145m
49 {38.3k,563,msb}<1,-1|1,-3>(16,-8,A:48,1,-50.1m){A=0xCACA35352BD4}
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3529
Location: UK/USA

                    
PostPosted: Fri Nov 02, 2012 5:21 pm    Post subject: Reply with quote

Thanks, but they don't seem to correlate with Vicky's explanation. For example Entries 15-17 appear to be repeats of Entries 4-6, i.e. OBCs 0f 01,02,03. And I learned only 36 buttons but there are 49 entries.

Sorry, even more confused now Smile
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Fri Nov 02, 2012 7:26 pm    Post subject: Reply with quote

Alan, I need you to relearn the Exit button,
I've updated my RDMU with the other values
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11420
Back to top
View user's profile Send private message Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Fri Nov 02, 2012 8:43 pm    Post subject: Reply with quote

I didn't look that closely, I just converted what you posted.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3529
Location: UK/USA

                    
PostPosted: Sat Nov 03, 2012 2:12 am    Post subject: Reply with quote

vickyg2003 wrote:
Alan, I need you to relearn the Exit button,
I've updated my RDMU with the other values
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11420
Many thanks, looks good. Four learns of the Exit button uploaded to http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11462
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Sat Nov 03, 2012 6:08 am    Post subject: Reply with quote

The Robman wrote:
I didn't look that closely, I just converted what you posted.


Rob, your post shows that you had combined both of the ICT's that Alan had posted. Without the NOTES column from the section above the IRP form, it would have been impossible for Alan to figure out what went where. Your IRScope-Decoder really was a life saver on this. IR really has better tools for decoding than IRScope does, even when its a simple binary encoded signal like this one is. It would be really cool if IRScope had some of these capabilities.


-------------------------
Alan, I updated my file to include the value of the exit key.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11420
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3529
Location: UK/USA

                    
PostPosted: Sat Nov 03, 2012 6:34 am    Post subject: Reply with quote

vickyg2003 wrote:
Alan, I updated my file to include the value of the exit key.
Thanks, I'll let you know the outcome.
Back to top
View user's profile Send private message
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3529
Location: UK/USA

                    
PostPosted: Sat Nov 03, 2012 9:21 am    Post subject: Reply with quote

User reports back it works 100% and says he will never stop saying thanks Smile I told him it was you 2 who did all the hard work, so many thanks, much appreciated.

Al
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Sat Nov 03, 2012 9:33 pm    Post subject: Reply with quote

vickyg2003 wrote:
Rob, your post shows that you had combined both of the ICT's that Alan had posted.

If that did happen, it was unintentional. I thought I cleared the UEI learned file first.

vickyg2003 wrote:
Without the NOTES column from the section above the IRP form, it would have been impossible for Alan to figure out what went where.

Yeah, I figured that out afterwards. I've never worked with IRP hex before and I did it really quickly between meetings at work, so I didn't notice that that section didn't include the notes, which makes it pretty pointless IMHO.

vickyg2003 wrote:
Your IRScope-Decoder really was a life saver on this. IR really has better tools for decoding than IRScope does, even when its a simple binary encoded signal like this one is. It would be really cool if IRScope had some of these capabilities.

Thanks and yup! I always dread it when the learns that I need to work with are in an ICT file rather than an IR file as I have to do all that conversion work first.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Sat Nov 03, 2012 9:37 pm    Post subject: Reply with quote

The Robman wrote:
I always dread it when the learns that I need to work with are in an ICT file rather than an IR file as I have to do all that conversion work first.

And I like the ICT file because I'm so visually oriented. If I get an IR file, I copy and paste all the learns into IRScope.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Sat Nov 03, 2012 9:42 pm    Post subject: Reply with quote

If only each tool could open the other's files.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Vyrolan



Joined: 24 Aug 2012
Posts: 168
Location: Chicago, IL

                    
PostPosted: Sat Nov 03, 2012 11:49 pm    Post subject: Reply with quote

The Robman wrote:
If only each tool could open the other's files.

LOL...wink wink nudge nudge. =p
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Sun Nov 04, 2012 9:09 am    Post subject: Reply with quote

Say no more John, know what I mean! Wink
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3529
Location: UK/USA

                    
PostPosted: Mon Nov 26, 2012 3:12 am    Post subject: Telesystem TS7500HD Reply with quote

This device is not decoding properly in IRScope. Here is the complete ICT file:

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11534

Be grateful on behalf of the user if it can be analysed.

Al
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Goto page Previous  1, 2, 3  Next
Page 2 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control