JP1 Remotes

split from: http://www.hifi-remote.com/forums/viewtopic.php?t=14240

I was wondering if anybody can help me out with creating the bins for the remotes for the following Meo Portugal Cable box from Scientific Atlanta ( Cisco )

CIS 2001

Let me know if ur able to help or guide me in right direction.
Thanks again,

Its for a European model SlingBox Pro-HD

Any help would be very appreciated.

Best regards,
Miguel

For the Cisco CIS 2001 try this one http://www.hifi-remote.com/forums/dload ... e_id=11334

ok i'll give it a try with the CIS2001 when I get home tonight.
and we can test the other one after.
Thanks again

Hey guys,
tried uploading both bin files to my slingbox setup
the c2001 RV and C2001 PL and no luck.
no reaction from any of the commands. Bummer, any ideas
( Scientific Atlanta ) CIS 2001

I produced files with codes C2010. Typo ? And please read the instructions in provided in full, as you don't appear to have done it,

Sorry what do you mean ?
Does the 2 files need to be changed? The naming or something ?

Also which one should I use with European sling box prohd?
Rv or Pl

i guess i've skipped a step, the type C2010.
its should be 2001? it that what you mean?
Thanks

Ok so I read the instructions several times.
this what am coming across, if it makes any sense.
when i choose other for manufactured it doesnt give the choice to enter C2001 as you said, unless I got into search for my device, which once i enter C2001 and hit next it comes up with no match found.
other scenario
If i go I choose cable box and go Other for Manufactured, then it doesnt let me move forward.
any ideas what am missing ?
If I choose Cable Box and Custom, then it gives me the option to load the Bin, however I've tried that.
what am i missing? also tried to rename the bins to 2001 instead of 2010

Help plz

Ok so I read the instructions several times.
this what am coming across, if it makes any sense.
when i choose other for manufactured it doesnt give the choice to enter C2001 as you said, unless I got into search for my device, which once i enter C2001 and hit next it comes up with no match found.
other scenario
If i go I choose cable box and go Other for Manufactured, then it doesnt let me move forward.
any ideas what am missing ?
If I choose Cable Box and Custom, then it gives me the option to load the Bin, however I've tried that.
what am i missing? also tried to rename the bins to 2001 instead of 2010

Help plz

You not following the instructions at no point do I mention C2001, the BIN files and the custom code are C2010. And I never say enter C2001.

I'm not sure which method you are using, but install the standalone slingplayer and follow my instructions. The instructions for the browser version are written by Sling are not very good.

Hey Alan,
Thanks for the feedback, from the sounds of it, you want me to use the sling player on the computer and not go through the setup on the sling website right? I"ll give it try later when I get home for sure n let you know.
Thanks for the support.
M

Hey Allan,
These are the steps i did as per your instructions
tried loading the files through the slingplayer and you suggested,
Under Cable for device
Manufactured Other
Model-Custom
the files are recognized when I enter C2010 matching the file name.
I am not sure if the problem is in the file or not, tomorrow am gonna have a friend going over to the slingbox location to do some testing on the Ir Blasters, since I have the 4 of them pointing at the Meo Box, the chances of not being point to the ir receiver at the box, are pretty slim. so I am going to try to see if the blasters are working or not. As i dont see any other cause for the commands that I am sending are not doing anything.
Let me know what ur though are in the cause of no commands are going through.

If the iR Blasters are firing I have no more suggestions. I have re-installed the Cisco C2001 on my Harmony Remote and the codes in that file are definately correct.

I'll let you know once i have them checked tomorrow.
thanks to both of you for all the help.