JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Yamaha RX-V373 Receiver

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search
View previous topic :: View next topic  
Author Message
jat355



Joined: 28 Aug 2012
Posts: 1

PostPosted: Tue Aug 28, 2012 7:49 pm    Post subject: Yamaha RX-V373 Receiver Reply with quote

1.Device: Yamaha RX-V373
2. Type of device: Receiver
3.Year: 2012
4.JP1/UEI remote model: Atlas 1055, Atlas 1056
5. Do you have a JP1 cable: no
6.Still have orginal remote: yes
7. Checked file section: yes
8.Checked Pronto file section(at R/C): no
9.Partially working setup code: AUD 1276
10. Learning remote question: n/a
11.Have you tried JP1 tool? no

My Suddenlink dvr remote will control volume and muting and will turn power off. It will not turn power on. I have been able to program 00247 into the INFO key and when I press Setup then INFO , the volume will increase. However when I try same procedure with EFC 00246 or EFC 248, I get no response from the receiver; i.e. the receiver does not turn off or turn on. Does this receiver use some other EFCs for power off/power on? I also tried AUD 1476 with same results.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6946
Location: Florida

PostPosted: Tue Aug 28, 2012 9:01 pm    Post subject: Reply with quote

I think you may be out of luck. I don't think you can do this without a cable.

I believe all the on/off switches for this receiver need to have the device number be 126 and as far as I know, there isn't a setup code in either remote that sends a Nec1 126 type signal.

I believe these are the codes you are looking for
Power On= Device 126, OBC 126
Power Off = Device 126, OBC 128
Power Toglee = Device 126, OBC 42

You might want to hunt through all the possible EFCs (0-255), to see if you can find something else, but it is pretty doubtful. We even have a NEC Yamaha combo to deal with these receivers because they send another type of signal too.
Back to top
View user's profile Send private message Visit poster's website
3FG
Expert


Joined: 19 May 2009
Posts: 3219

PostPosted: Tue Aug 28, 2012 10:56 pm    Post subject: Reply with quote

There is a small chance that your receiver will respond to 00250.

Also, the Lookup Tool doesn't list Audio 1476 for either the 1055 or 1056. However, if you do get two blinks when you try to assign Audio 1478, then use these EFCs:
36741 Power toggle
16005 Power On
17029 Power Off

Vicky,
I believe that Power Off is OBC 127, not 128.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6946
Location: Florida

PostPosted: Wed Sep 05, 2012 12:16 pm    Post subject: Reply with quote

3FG wrote:


Vicky,
I believe that Power Off is OBC 127, not 128.

I got mine from a shoddy source, so I believe you are right.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central