JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Needing help with a Charter Remote

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Non-JP1
View previous topic :: View next topic  
Author Message
Ashleynrogers



Joined: 29 Oct 2017
Posts: 2

                    
PostPosted: Sun Oct 29, 2017 5:42 pm    Post subject: Needing help with a Charter Remote Reply with quote

First off thank you for taking the time to read this and I hope you can help. I have the newest charter remote I believe it’s URC 1060BC2, C4000. I originally was trying to have my remotes ok/select button work on Borge the CBL fiction and the TV function. I used codes I found but managed to screw up both to where when I hit the ok button it goes to channel 0 on both CBL and TV mode....

Now I am looking to get the ok button back to functioning at the bare minimum for ge cable function. If I could get it to work for both can and tv that would be amazing. That would allow me to just use one remote instead of 2 on a regular basis. Any help is much appreciated!!!
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Sun Oct 29, 2017 6:28 pm    Post subject: Reply with quote

Hold Setup for 2 blinks then 981 to reset remote to factory defaults.

We need the make/model of your TV to get you the correct OK code. The working TV setup code you're using now would also be helpful.
Back to top
View user's profile Send private message
Ashleynrogers



Joined: 29 Oct 2017
Posts: 2

                    
PostPosted: Sun Oct 29, 2017 8:40 pm    Post subject: Reply with quote

My tv is a

55" Class (54.6" Diag.) - LED - 2160p - Smart - 4K Ultra HD TV with High Dynamic Range
Model numbers is XBR55X800E
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Sun Oct 29, 2017 10:14 pm    Post subject: Reply with quote

It might be safer to use the 980 code, instead of 981, just in case there are some OEM codes pre-loaded.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Tue Oct 31, 2017 6:57 pm    Post subject: Reply with quote

For the correct EFC for OK on your Sony TV, go here, search for Sony TV, then find the setup code you're using in the results (most likely 10000, 10810 or 11100). On some remotes, you drop the leading digit of the setup code. Then click the EFCs link and use the one for OK/Select.

http://www.hifi-remote.com/jp1/lookup/

Procedure for programming the EFC:

http://www.hifi-remote.com/wiki/index.php?title=Manual_Programming_-_9xx_Commands#Program_Effective_Function_Code_.28EFC.29_for_a_single_device
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Non-JP1 All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control