Page 1 of 1
can we convert PL to Gondar? seeking help for Vulkano Flow
Posted: Sun Jul 15, 2012 1:02 pm
by dtsexpert
Found the PL bin for the iptv stb ZTE ZXV10 B700
https://www.hifi-remote.com/forums/dload ... e_id=10429
Vulkano Flow uses Gondar therefore the this bin can't be used with it.
Is there a way to convert PL to Gondar?
Your help is very appreciated.
Thanks
Mike
Posted: Sun Jul 15, 2012 1:52 pm
by The Robman
I had to do some research in order to know how to answer this.
First, I found the following page that tells us what a Vulkano is:
http://www.gizmolovers.com/2011/10/10/a ... ompetitor/
Then I found the following thread in a Vulkano forum that tells us that an RDF exists for the Vulkano:
http://vulkanocommunity.com/forum/remot ... -flowlava/
This lead me to search the JP1 file section for the RDF, which I found here:
https://www.hifi-remote.com/forums/dload ... le_id=8985
I downloaded the file that you linked to but unfortunately the zip file doesn't include an RMDU file
https://www.hifi-remote.com/forums/dload ... e_id=10429
But I found the RMDU file here:
https://www.hifi-remote.com/forums/dload ... e_id=10438
So, I opened that RMDU file using RM and changed the selected remote from the Slingbox to the Vulkano. I then assigned as many buttons as I could and created the following BIN file:
https://www.hifi-remote.com/forums/dload ... e_id=11112
Posted: Mon Jul 16, 2012 4:47 am
by dtsexpert
Rob,
Thanks so much for your help. Just downloaded the BIN you created. The tech gonna stop by next few days to install the IPTV stb. Will test the BIN with my Vulkano Flow and let you know how it's going.
Once again, thanks so much for your help.
Michael
Posted: Tue Jul 17, 2012 1:07 am
by dtsexpert
Rob,
Just loaded the bin to Vulkano Flow but it does not work
Any other suggestion?
thanks,
Michael
Posted: Tue Jul 17, 2012 2:17 pm
by dtsexpert
Rob,
Vulkano allows users to make a learn bin (the unit can learn the remote command)
Kind of neat. I have a learn bin for my iptv stb ZTE ZXV10 B700
If anyone needs it for Vulkano Flow/Lava, feel free to contact me
Posted: Tue Jul 17, 2012 2:53 pm
by The Robman
Could you post it so we can look at it?
Posted: Thu Jul 19, 2012 7:10 am
by alanrichey
Does an Axum version work with the Gondar ?
Posted: Thu Jul 19, 2012 9:55 am
by dtsexpert
Rob,
I upload the lrn bin (learn bin) for Vulkano here:
https://www.hifi-remote.com/forums/dload ... e_id=11127
I also posted another thread on Vulkano forum
http://vulkanocommunity.com/forum/remot ... va/#p10966
This learn bin works great with the Vulkano Flow/Lava/Blast (Gondar)
REally hope that you guys can benefit from this bin, make it useful for JP1 user.
Thanks,
Michael
Posted: Sat Jul 21, 2012 12:21 pm
by binky123
Here is the Gondar LRN file format.
Offset 69h is the button keycode list.
Difference between each chunk is 7Ch/124d which is at offset 66h.
Chunk format is <keycode> <Length of Chunk> <2-byte offset?> <keycode> <Length of Learn Payload>
Take <Length of Learn Payload> and rest of <Length of Learn Payload> bytes and add 01 20 at the front and paste into IR Learned Data section to see the learned code analysis. Some of the chunks have extraneous bytes.
Code: Select all
First 4 keycodes:
0169: 01 33 00 00 01 30 00 D6 06 01 26 BC D6 01 26 40
62 11 C3 08 6A 11 C3 04 01 01 26 03 36 01 26 01
1D 24 25 55 55 55 54 44 44 44 44 55 55 55 55 44
44 44 41 30 82 30
01E5: 02 37 00 00 02 34 00 CE 07 01 28 BC D5 01 28 40
60 11 26 09 07 11 26 04 9E 03 EC 11 B0 01 28 03
34 01 28 01 1B 24 26 66 66 66 65 55 55 55 56 56
66 66 65 65 55 55 51 30 82 30
0261: 03 33 00 00 03 30 00 CE 06 01 28 BC D5 01 28 40
61 11 26 09 07 11 26 04 9E 01 28 03 34 01 28 01
1C 24 25 55 55 55 54 44 44 44 44 45 55 55 55 54
44 44 41 30 82 30
02DD: 04 47 00 00 04 44 00 D7 0A 01 27 BC D7 00 F1 BD
0C 01 27 40 62 11 D8 08 55 0A B4 0B 4A 11 D8 03
EC 05 67 10 5D 02 F0 12 D3 01 27 03 35 01 27 01
1C 24 39 99 99 99 98 88 88 88 89 98 99 99 98 89
88 88 82 50 82 50 06 41 61 70
Custom38 and Custom39:
1355: 26 42 00 00 26 3F 00 CE 09 00 4D D3 4A 00 E7 BC
DE 01 1B BC 65 11 26 09 08 09 67 0C 97 05 2E 10
D0 04 39 11 8B 01 28 03 34 01 28 01 1B 2D 38 88
88 88 87 77 77 77 77 87 78 88 88 78 87 77 72 05
16 25 14 16 20
13D1: 27 33 00 00 27 30 00 CF 06 01 29 BC D6 01 29 40
60 11 3B 08 F2 11 3B 04 89 01 29 03 33 01 29 01
1A 24 25 55 55 55 54 44 44 44 44 45 54 55 55 54
45 44 41 30 82 30
So to decode Custom39, paste into IR Learned Signals Tab
01 20
30 00 CF 06 01 29 BC D6 01 29 40
60 11 3B 08 F2 11 3B 04 89 01 29 03 33 01 29 01
1A 24 25 55 55 55 54 44 44 44 44 45 54 55 55 54
45 44 41 30 82 30
and it should decode to NEC1 Dev=0 OBC=19 Hex=37
Here are the OBCs of your LRN file:
NEC1 Device=0. PID=005A Fixed=00 FF 00.
1 Digit1
2 Digit2
3 Digit3
4 Digit4
5 Digit5
6 Digit6
7 Digit7
8 Digit8
9 Digit9
0 Digit0
12 Volume Up
24 Volume Down
18 Mute
11 Channel Up
21 Channel Down
64 Power
22 Last Channel
68 Play
69 Stop
70 FFwd
67 Reverse
68 Pause
17 Record
77 PVR Menu
71 Menu Up
75 Menu Down
72 Menu Left
74 Menu Right
73 Menu Select
76 Exit
30 Info/Display
86 Program,Guide
19 Quick Skip; Advance
79 Instant Replay
78 Return to Live
Custom buttons:
38: OBC=13 Page up / skip backward
39: OBC=19 Page down / skip forward
40: OBC=78 F1
41: OBC=79 F2
42: OBC=80 F3
43: OBC=81 F4
44: OBC=28 L/R Audio
45: OBC=29 Setting
Re: can we convert PL to Gondar? seeking help for Vulkano Fl
Posted: Sat Jul 21, 2012 2:51 pm
by vickyg2003
Well its no wonder this Nokia32 upgrade didn't work for a box that was expecting a Nec1 0 upgrade.
Posted: Sun Jul 29, 2012 9:19 pm
by The Robman
Did anyone make an upgrade for this yet?
Posted: Mon Jul 30, 2012 3:30 am
by vickyg2003
The Robman wrote:Did anyone make an upgrade for this yet?
Not before you asked. I just added a KM file, but have noted that both Noirfire, and Eferez posted upgrades for this ZTE file that use the Nokia32. It does appear that there might be a V3 behind the 700 number though.
https://www.hifi-remote.com/forums/dload ... e_id=11144
Posted: Mon May 06, 2013 8:37 am
by dtsexpert
Edit regarding to the sensitivity of the command. It seems Vulkano software is buggy. AT first, I did not select any remote bin available in Vulkano player, I skipped this step and went straight to load the lrn bin. Looks like Vulkano does not like this, causing to send 3 command in a row.
By luck, I just tried to load whatever built-in bin, then change it to load the lrn one.
It now works fine, sending just 1 command at a time.
ONce again, thanks so much for those replying trying to help me
I am now back in business.
Posted: Mon May 06, 2013 8:51 am
by alanrichey
I don't know if it will help as I can't see from the thread what IR Protocol you used. But in the File Section under Slingbox Work Files there is a group of new entries for PROTOCOLS.INI that have the repeat rate set to zero. If your IR protocol matches any of these you could try that.