JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Atlas 1056 B03 Extender v1.00

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Extenders
View previous topic :: View next topic  
Author Message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 4508
Location: Cambridge, UK

                    
PostPosted: Fri Jun 08, 2012 5:21 am    Post subject: Atlas 1056 B03 Extender v1.00 Reply with quote

I have built and uploaded Extender v1.00 for the Atlas 1056 B03. This is the first extender for a JP2 remote and should be regarded at present as experimental, with the usual warning USE AT YOUR OWN RISK. If you try it, please report your experience in this thread, whether it is good or bad.

The extender adds to the remote the capabilities for keymoves and device specific macros (DSMs), including device specific multimacros on the three multimacro keys. It differs from most other extenders in that no existing functionality of the remote is changed. The extender remains in place through a change of batteries and even through a 981 factory reset. The six-character signature of the remote is changed from 201009 to 2010A9 when the extender is installed, but the five-digit signature returned by the 983 blink-back command remains as 20109. The installer in the extender package can be used also to uninstall it if desired. Full instructions for installing and uninstalling the extender are given in the ReadMe file in the extender package.

To install and use the extender, you need RMIR v2.02 Beta 1.5t or later. Instructions for installing this development version are given in this post, also reachable through the Web Site link on its file download page.
_________________
Graham
Back to top
View user's profile Send private message
zjays



Joined: 08 Mar 2014
Posts: 5

                    
PostPosted: Mon Aug 24, 2015 1:30 am    Post subject: Reply with quote

Hi mathdon,

I just installed the extender on my Atlas 1056B03 in order to gain key move functionality, and it worked great. Thanks for writing this and providing the easy-to-follow ReadMe!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Extenders All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control