JP1 Remotes

As happens to me regularly I am being asked to produce SlingBox BIN files with the repeat bit set to zero. So far, thanks to RobMan I have 'tweaked' versions of the NEC1, RC-5 and GI-Cable protocols but would like to do a few more. And to avoid having to bother Rob I would like to do it myself.

I have been through all the documentation for Protocol Builder but cannot find a simple step-by-step guide on how to import an existing protocol such as :

Code.S3C80=47 93 61 8B 12 87 05 08 04 00 DE 00 00 00 00 00 \
CA D4 44 05 35 01 A8 0C 0A 18 07 02 11 10 08 10 \
07 10 09 10 C1 1E 10 08 10 07 0A EF 19 09 8D 01 \
46

Change the assembler values to zero the repeat bit and then save it as a new protocol.

Does such a tutorial exist ? If not could someone produce one ?

Thanks

Al

alanrichey wrote:I have been through all the documentation for Protocol Builder but cannot find a simple step-by-step guide on how to import an existing protocol such as :

Code.S3C80=47 93 61 8B 12 87 05 08 04 00 DE 00 00 00 00 00 \
CA D4 44 05 35 01 A8 0C 0A 18 07 02 11 10 08 10 \
07 10 09 10 C1 1E 10 08 10 07 0A EF 19 09 8D 01 \
46

Reformat the protocols.ini code like this: where:
XX XX is the protocol ID (ex: 00 5a)
PPPPPP is the PB processor type (ex: S3C8+)

Now paste this into the Notes area, using paste special|text.

Set the Remote Type correctly, then click the Decode button.

Go to the Assembler tab and click on Load Disassembly.

Thanks Mike, just what I needed. It was the 'Paste Special Text' bit I was missing in my experiments. And I now have a UK Sky box (RC6-M-20n) without a 'double-skip' when I try and navigate the TV Guide