Page 1 of 2
bin file for skyworth HC7620
Posted: Sun May 06, 2012 6:16 am
by make626
I need bin file for the remote
skyworth HC7620
http://www.skyworthdigital.com.cn/produ ... 79524.html
It is a digital cable stb.
thx[/url]
Posted: Sun May 06, 2012 12:51 pm
by alanrichey
Closest I could find was the SkyWorth HC800. Any good ?
https://www.hifi-remote.com/forums/dload ... e_id=10933
Posted: Sun May 06, 2012 9:25 pm
by make626
I will try it later~Thank you~
Posted: Mon May 07, 2012 8:05 am
by make626
It doesn't work，so sad~
does any one can help me?thx
Posted: Mon May 07, 2012 8:34 am
by alanrichey
Can you please read the instructions properly and give me a better feedback report.
Posted: Mon May 07, 2012 9:14 am
by make626
alanrichey wrote:Can you please read the instructions properly and give me a better feedback report.
1. Was there any error message after you typed in the Code and tapped the Power button ?
No
2. Did you give the Power command plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)
Yes
3. After completing the setup (regardless of whether the Power button worked) do any of the other buttons work ?
every buttons don't work
4. Have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ?
(Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash)
I can see white flash
5. Have you experimented with the placement of the IR Blaster ? On some devices this is critical so don't give up too quickly.
yes
6. Are you sure the device is working correctly using the real remote ?
yes
thank you~
Posted: Mon May 07, 2012 9:24 am
by alanrichey
Good, thanls for that. Does show the codes are probably incorrect. Have to wait till either that device is installed by a Harmony Remote owner or Sling fix
http://remotes.slingbox.com
Posted: Mon May 07, 2012 9:30 am
by make626
alanrichey wrote:Good, thanls for that. Does show the codes are probably incorrect. Have to wait till either that device is installed by a Harmony Remote owner or Sling fix
http://remotes.slingbox.com
ok thank you any way
Posted: Sat Oct 05, 2013 12:34 pm
by chuliu
https://www.hifi-remote.com/forums/dload ... e_id=12091
I created the file using logitech remote now that they added it to the database. Please confirm if it works or not. Thanks.
Posted: Sat Nov 02, 2013 10:53 am
by chuliu
It's a shame that the file I made was downloaded 6 times. 6 people on the planet needed the file. Yet, no one is willing to provide feedback about if it works or not.
Posted: Sat Nov 02, 2013 12:02 pm
by alanrichey
You get used to it I'm afraid
Posted: Sat Nov 02, 2013 2:25 pm
by vickyg2003
alanrichey wrote:You get used to it I'm afraid
unfortunately too true! Sigh
Posted: Sun Nov 10, 2013 9:07 am
by Cap3301
Hi Chuliu,
Sorry to inform tell you that your hc7620 binary file did not work for my slingbox.
Thank you....
Posted: Sun Nov 10, 2013 9:22 am
by alanrichey
Jumping in here, I can confirm that the BIN files provided by chuliu are correct for that box, although I would caution that the codes seem to have been uploaded to the Harmony database by only one person, so if they didn't do it correctly.....
I have updated the file at
https://www.hifi-remote.com/forums/dload ... e_id=12091 with a set of instructions and trouble-shooting suggestions. Please give it another try and report back.
Posted: Sun Nov 17, 2013 9:59 am
by chuliu
Hi Alan.
I didn't know one can check how many people uploaded the codes to harmony database. In fact, I don't even know it was updatable by just any users of the remote. Let alone how to update it.
If I know how to update the database, I have several remotes I wanted to update to it. Please show me.