need bin file for ipmacro ihd-5301

devank · Post by **devank** » Fri Apr 20, 2012 10:20 pm

i have spend 4 hours lokking on the internet and every where else, can some one please build a bin file for slingbox, this is a board most commonly used for iptv these days and i would like to have it used through sling player

any help by great brains at JP1 is appriciated...

alanrichey · Post by **alanrichey** » Fri Apr 20, 2012 11:24 pm

Just so you know you are not being ignored, I'm away from home at the moment but can take a look next week.

Al

devank · Post by **devank** » Sat Apr 21, 2012 8:38 pm

Thanks very much for replying I'll be waiting you guys rock and I am sure you guys will be able to figure it out.
Thanks again

alanrichey · Post by **alanrichey** » Mon Apr 23, 2012 5:54 am

Doesn't look as though I can do anything. iPMacro is not a recognised Manufacturer in the Logitech Harmony IR Database so I cannot install it on my learning remote.

Have you tried using remotes.slingbox.com ?

devank · Post by **devank** » Mon Apr 23, 2012 6:32 pm

Thanks for the reply.. After digging more it looks like the board is made by a Chinese company Chengdu haoteng.
I was trying remotes.slingbox.com with different computers and different browsers but could not move any further then step 3 and when I choose to create a remote nothing happens in step 4.
Any guidance would be very helpful.
Thanks

alanrichey · Post by **alanrichey** » Tue Apr 24, 2012 12:20 am

remotes.slingbox.com has been down for a couple of weeks now. Sling seems to have lost interest in it.

Post by **The Robman** » Tue Apr 24, 2012 9:12 am

alanrichey wrote:remotes.slingbox.com has been down for a couple of weeks now. Sling seems to have lost interest in it.

I've alerted Sling to the fact that the site doesn't work any more (they didn't know) so they will look at it.

alanrichey · Post by **alanrichey** » Tue Apr 24, 2012 9:44 am

Sounds like a bit of right hand and left hand. I have notified the moderators of answers.slingbox.com and also another technical team inside Sling, both of whom acknowledged the problem was known about and was being worked on.

I despair of the Company sometimes.

devank · Post by **devank** » Wed Apr 25, 2012 12:08 pm

u guys are all awesome here and this forum rocks, you guys are doing your bit hopefully sling remotes site starts working and i can get the ihd-5301 remote ...

thanks all for chipping in.. i am still hopeful with u all on my side..

alanrichey · Post by **alanrichey** » Wed Apr 25, 2012 1:36 pm

I wouldn't bank on it. At my request Sling have just posted an announcement at http://answers.slingbox.com/community/s ... te_control

As I understand it this is going to take a LONG time to fix

devank · Post by **devank** » Mon May 07, 2012 8:34 am

alright guys...

thanks to everyone who replied but i am going to give up now since slings site is not operational and i dont know what to do any more, i would have loved to control that iptv box as its an awesome box giving me around 100 tv channels on internet with great quality, its made by a chinese company called Chengdu heotang. may be one day when it beomes more popular some genious over here will be able to get us the remote bin file...

thanks all.

Devank

Post by **The Robman** » Mon May 07, 2012 3:19 pm

Do you have the original remote for this device? And if so, could you stand to be without it for a period of time? If you were willing, you could send it to one of us so we can capture the signals and create a bin file.

Most of us are located in the USA but we have some other folks scattered around the globe. Where are you located?

devank · Post by **devank** » Wed Aug 22, 2012 9:40 pm

First of all thanks to everyone who volunteered to help. I wanted to send the remote to rob man for getting help on custom remote, this is a busy box and always used so I was not able to.
After trying all combinations I figured by selecting cable as provider and doing custom codes and selecting code 10, I am able to control the box , I can switch on /off, change channels and control volume. That was all I needed. Long live JP1 forums.

Post by **The Robman** » Wed Aug 22, 2012 10:00 pm

I was hoping to look up CBL/0010 and post the results, but I have that code listed.

Hey Alan, would you be able to load that code into your Slingbox and capture the signals from it?

alanrichey · Post by **alanrichey** » Thu Aug 23, 2012 6:04 am

After selecting Cable, What manufacturer did you select ?

JP1 Remotes

need bin file for ipmacro ihd-5301

need bin file for ipmacro ihd-5301

Will be waiting

The board is from Chengdu haoteng

thansk all

going to give up now

Just an update