|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
joegovernale
Joined: 26 Jun 2005 Posts: 17
|
Posted: Sun Feb 20, 2022 6:04 am Post subject: |
|
|
It's been years since I've done more than device updates or key moves, my last JP1.x cable failed and needs to be replaced. I would like to confirm before I go through the effort, the following cable is the correct choice as a JP1.x cable for use with OCAP Atlas remotes correct? https://www.amazon.com/gp/product/B014GZTCC6/ref=ox_sc_saved_title_1?smid=A28JUS3SJ1A0RV&th=1
I'm planning on using "AN EASIER WAY TO BUILD YOUR OWN JP1.2/3 (FLASH) INTERFACE" by Tommy Tyler as the wiring reference. Any comments or suggestions would be appreciated. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Sun Feb 20, 2022 8:43 am Post subject: |
|
|
That cable should work fine. |
|
Back to top |
|
|
joegovernale
Joined: 26 Jun 2005 Posts: 17
|
Posted: Wed Feb 23, 2022 7:33 am Post subject: |
|
|
Confirmed:
https://www.amazon.com/gp/product/B014GZTCC6/ works great.
The connector/cable wire colors:
2/Yellow
3/Black
4/Green
6/White
Connector pins 1 & 5 are unused
Another Harmony remote goes unsold.
@mdavej, Thanks for the confirmation. |
|
Back to top |
|
|
joegovernale
Joined: 26 Jun 2005 Posts: 17
|
Posted: Wed Nov 29, 2023 7:24 am Post subject: Another FTDI module source |
|
|
Confirmed that the FT232RL FTDI module from TEMU is another viable source for a working interface cable. A TEMU search for "FT232RL" finds various vendors/prices. The board is a mini USB female to male header pins and through hole solder pads for the remote connections. I used TEMU's DuPont 40 pin female to female breadboard cable kit to make up the remote-side plug. RTS requires either adding a pin or soldering to through hole pad on the board.
Connections to the remote pins below:
Pin 2 RTS
Pin 3 GND
Pin 4 TXd
Pin 6 RXd |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|