JP1 Remotes

Does anyone have the codes for

Logik L2STB11 = Bush BU10FVZSI = Curry's C1STB11

All use the identical remote control for a set top box that I want to plug into a Slingbox Classic (don't ask!!).
A piccy of the remote is here
http://www.currys.co.uk/gbuk/essentials ... 7-pdt.html

I've tried every code for each of the individual manufacturers but no success...

lushbuttocks wrote:Does anyone have the codes for

Logik L2STB11 = Bush BU10FVZSI = Curry's C1STB11

All use the identical remote control for a set top box that I want to plug into a Slingbox Classic (don't ask!!).
A piccy of the remote is here
http://www.currys.co.uk/gbuk/essentials ... 7-pdt.html

I've tried every code for each of the individual manufacturers but no success...

Could not find a match for your device. If you have access to a Slingbox Pro-HD or Solo, you may want to try using the instructions in this link (http://slingbox.wikia.com/wiki/How_to_u ... s_website.) to teach the IR commands from the OEM remote to to your Slingbox. This will create a custom profile that's usable with your device. Should you want bin files for customization or to use with other SlingRemote skins, then you can share the related Learnt Guid information. This will allow us to create the appropriate files from the IR device profile stored in Sling Media's Cloud.

If you have a compatible JP1 learning remote with the appropriate Flash cable (and an adapter if necessary) then you can use either IR or RMIR to upload a copy of your remote's image with its learned signals. Otherwise, you can pick up IR Scope and an IR Widget to record the commands to your computer. Uploading your file(s) into our diagnostic section from either method will offer us the resource to create customized upgrades which will allow control of that particular device. There are also Do-It-Yourself instructions available if you would like to be more self-sufficient.

Incidentally, just because the remotes look similar doesn't mean they all use the same IR signals. It just means they were probably made by the the same OEM.

eferz wrote:

lushbuttocks wrote:Does anyone have the codes for

Logik L2STB11 = Bush BU10FVZSI = Curry's C1STB11

All use the identical remote control for a set top box that I want to plug into a Slingbox Classic (don't ask!!).
A piccy of the remote is here
http://www.currys.co.uk/gbuk/essentials ... 7-pdt.html

I've tried every code for each of the individual manufacturers but no success...

Could not find a match for your device. If you have access to a Slingbox Pro-HD or Solo, you may want to try using the instructions in this link (http://slingbox.wikia.com/wiki/How_to_u ... s_website.) to teach the IR commands from the OEM remote to to your Slingbox. This will create a custom profile that's usable with your device. Should you want bin files for customization or to use with other SlingRemote skins, then you can share the related Learnt Guid information. This will allow us to create the appropriate files from the IR device profile stored in Sling Media's Cloud.

If you have a compatible JP1 learning remote with the appropriate Flash cable (and an adapter if necessary) then you can use either IR or RMIR to upload a copy of your remote's image with its learned signals. Otherwise, you can pick up IR Scope and an IR Widget to record the commands to your computer. Uploading your file(s) into our diagnostic section from either method will offer us the resource to create customized upgrades which will allow control of that particular device. There are also Do-It-Yourself instructions available if you would like to be more self-sufficient.

Incidentally, just because the remotes look similar doesn't mean they all use the same IR signals. It just means they were probably made by the the same OEM.

Thanks for that but I've trawled through it all before I posted (sob!). I'll get the remote sent out to me here in Greece where I've got all the gear (oscilloscope, logic analyser etc) and see what I can do... Looks like this may be more of a job than I intended (no change there then!)

lushbuttocks wrote:Thanks for that but I've trawled through it all before I posted (sob!). I'll get the remote sent out to me here in Greece where I've got all the gear (oscilloscope, logic analyser etc) and see what I can do... Looks like this may be more of a job than I intended (no change there then!)

Sounds good. Sorry, I couldn't help. Honestly, I'm not sure what you'd do with an oscilloscope or logic analyzer. Just remember the IR Widget that Tommy sells is pretty inexpensive and already works with our tools to create bin files for the Slingbox. Anyways, if you do get upgrades going please do us a favor and upload your RMDU and BIN fies into our File Section. Good luck!