View previous topic :: View next topic |
Author |
Message |
mfiusa
Joined: 27 Jun 2011 Posts: 6 Location: Sao Paulo, Brasil |
Posted: Mon Jun 27, 2011 8:50 pm Post subject: Help with codes for ZyXel STB-2102 Nano |
|
|
Hi,
I'm looking for the Binary code to make my “ZyXel STB2102 Nano” work with slingbox solo and have been unable to find it.
I've searched everywhere for codes for this set-top-box which is supplied by Telefonica for the optic fiber customers in Brazil.
Any help with the codes is very much appreciated. Thanks in advance!!! |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Tue Jun 28, 2011 6:34 am Post subject: |
|
|
According to my findings this uses the same codes as the ZyXel STB100H. What happened when you tried that Custom Remote ? |
|
Back to top |
|
|
mfiusa
Joined: 27 Jun 2011 Posts: 6 Location: Sao Paulo, Brasil |
Posted: Tue Jun 28, 2011 8:57 pm Post subject: |
|
|
alanrichey wrote: | According to my findings this uses the same codes as the ZyXel STB100H. What happened when you tried that Custom Remote ? |
Hi alanrichey, thanks for the quick response.
I've tried the ZyXel STB100H before, but after your post I tried it again to be certain it does not work for the STB-2102.
I did not receive any error message. (except the “No update found. Please click next to continue” which is just related to the skin, right?)
The power command did not work, anyway I continued to finalize the setup. None of the buttons worked.
The IR blasters are working. I confirmed that with the digital camera test as well as checking a green light on the STB that flashes shortly when receiving IR commands.
I also tried configuring it in two machines with Sling Player as well as switching to another remote and then back to the STB100H custom files.
I think I did all the tests to confirm the ZyXel STB-2102 Nano do not work with the STB100H files, but please let me know if you think I should do any further test or configuration.
I still have hope in making this remote to work!!!
Thanks Again,
BR,
Marcelo |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Wed Jun 29, 2011 6:09 am Post subject: |
|
|
You seem to have done everything I can think of. No more suggestions I'm afraid.
I assume you have tried http://remotes.slingbox.com ? |
|
Back to top |
|
|
mfiusa
Joined: 27 Jun 2011 Posts: 6 Location: Sao Paulo, Brasil |
Posted: Wed Jun 29, 2011 7:53 pm Post subject: |
|
|
Alanrichey, thanks for the help! I was able to map most of the keys using the tool on http://remotes.slingbox.com
Only the Power button there was no way to make it work. Is it common? Is there any tip to make the power button to work?
I don't know whether this process saved in my machine a file with this remote configuration. If it did maybe I can share it making it easier for others. Please let me know.
Best Regards,
Marcelo |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Wed Jun 29, 2011 8:12 pm Post subject: |
|
|
Yes, if you use the Export Remote option it will save a 'myRemote.lrz' file. Post that here and I will have a look at it. |
|
Back to top |
|
|
mfiusa
Joined: 27 Jun 2011 Posts: 6 Location: Sao Paulo, Brasil |
Posted: Fri Jul 01, 2011 6:55 pm Post subject: |
|
|
alanrichey wrote: | Yes, if you use the Export Remote option it will save a 'myRemote.lrz' file. Post that here and I will have a look at it. |
I uploaded the file "myRemote.lrz" to this link:
{{megaupload file deleted}}
I really appreciate if I can get any help to make the Power button work.
The other important buttons are working fine in this file.
Thanks in advance!!! |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Fri Jul 01, 2011 7:29 pm Post subject: |
|
|
That isn't how it's going to happen. I cannot edit that file to add the Power Button, but I can use it to try and produce a Custom Remote.
Now, I managed to figure out half the buttons (not including the Power Button unfortunately) and have produced a test Custom Remote at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=9724
This has the number buttons and a couple of arrow buttons and the Menu buttons mapped out. Do they work ? |
|
Back to top |
|
|
mfiusa
Joined: 27 Jun 2011 Posts: 6 Location: Sao Paulo, Brasil |
Posted: Fri Jul 01, 2011 7:59 pm Post subject: |
|
|
Alan, thanks, but I could not use the file you sent. When selecting Others>Custom and putting the code C2010 I receive the following message: "Custom remote code not found. Please try a different code."
The files are in the ...\SlingPlayer\SBAV.
Is there any logical reason for the code mapping I did fail the only the power button? I tried it many times. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Fri Jul 01, 2011 8:10 pm Post subject: |
|
|
Sorry, my fault, I missed a step out in the build. I've updated the file with new BIN files, try again. |
|
Back to top |
|
|
mfiusa
Joined: 27 Jun 2011 Posts: 6 Location: Sao Paulo, Brasil |
Posted: Sun Jul 03, 2011 2:26 pm Post subject: |
|
|
The remote has a few problems:
These keys (that were in the .lrz file) are not enabled in the remote you sent: left arrow, up arrow, ok, back (last) and guide.
This key is enabled but with the wrong code: number 8 (it is sending same as the menu button).
All other buttons are good: 1, 2, 3, 4, 5 ,6 ,7, 9, 0, up channel, down channel, right arrow, down arrow and menu.
Thanks again for the help.
Best Regards. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Jul 03, 2011 3:30 pm Post subject: |
|
|
Alan,
Give these OBC's a try
OBC
92 =number 8
8 = power
88 = left
56 = up
107 = mute
15 = ok/select
91 =exit
124= display _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sun Jul 03, 2011 6:24 pm Post subject: |
|
|
mfiusa wrote: | The remote has a few problems:
These keys (that were in the .lrz file) are not enabled in the remote you sent: left arrow, up arrow, ok, back (last) and guide.
This key is enabled but with the wrong code: number 8 (it is sending same as the menu button).
All other buttons are good: 1, 2, 3, 4, 5 ,6 ,7, 9, 0, up channel, down channel, right arrow, down arrow and menu. | That's what I said when I posted it I only managed to recover those codes from the LRZ file. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
|
Back to top |
|
|
baracat
Joined: 20 Feb 2012 Posts: 6
|
Posted: Mon Feb 20, 2012 11:44 pm Post subject: |
|
|
I also need help with the codes!
MegaUpload has been shutdown, I cant download your .bin
Please help me!!
Também sou brasileiro cara, e também assinante do Fibra Telefonica
Abraços |
|
Back to top |
|
|
|