JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Apple TV 2010

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
simonsezdothis



Joined: 23 Nov 2005
Posts: 69

PostPosted: Tue Jan 17, 2012 10:08 pm    Post subject: Apple TV 2010 Reply with quote

I have an Apple TV remote with 7 buttons on.
Up, Down, Left, Right, Select, Menu, Play/Pause.

The upgrade files posted here must refer to a different remote as they include some other functions also. Perhaps an earlier version of this product?

I have learned this remote with an IR Widget and get the following results.

Protocol=Apple Device=238.135
no repeat:PairID=161

Up: OBC=5
Down: OBC=6
Left: OBC=4
Right: OBC=3
Menu: OBC=1
Select: OBC=46
OBC=2
Play/Pause OBC=47
OBC=2

As you can see the Select and Play/Pause buttons have two parts.
If I export from IRScope the resulting Pronto Hex all works except for Select and Play/Pause. (out of interest ... select OBC 46 will select menu items but not make status changes to those items)

The Apple protocol in Remote Master will not generate any useable commands with my URC7781. In fact the IR receive indicator on the Apple TV box won't even flash in response.

How can I combine the 2 codes to get single Select and Play commands?
Hope someone can help with this one too.

Peter
Back to top
View user's profile Send private message Send e-mail
simonsezdothis



Joined: 23 Nov 2005
Posts: 69

PostPosted: Tue Jan 17, 2012 10:34 pm    Post subject: Reply with quote

I should add that I only use my URC7781 for testing purposes.
What I'm trying to achieve is clean Pronto Hex that can be imported into any control system.
Back to top
View user's profile Send private message Send e-mail
3FG
Expert


Joined: 19 May 2009
Posts: 3253

PostPosted: Tue Jan 17, 2012 10:49 pm    Post subject: Reply with quote

The Apple protocol in protocols.ini only has code for the Samsung micros, while your 7781 is a Motorola HCS08. I'm a litle surprised that RMIR allowed you to even try to use it.

This thread, especially the last two pages has useful information. As described there one way to get the two signals is to incorporate them into a 2 button press macro.

There is also a XMBC/Apple thread which has various protocol executors, including HCS08. You can find these in the Protocols file section. You should be able to find one of the 4 which meets your needs.
Back to top
View user's profile Send private message
simonsezdothis



Joined: 23 Nov 2005
Posts: 69

PostPosted: Thu Jan 19, 2012 4:22 am    Post subject: Reply with quote

Thanks ... I've not been using RMIR. IR V8.03 instead.
Seems RMIR is the way going forward, I'll start using that in future.

I think a macro is probably by far the easiest way to deal with this one.
I'll be trying it out tomorrow.

Cheers
Peter
Back to top
View user's profile Send private message Send e-mail
simonsezdothis



Joined: 23 Nov 2005
Posts: 69

PostPosted: Fri Jan 20, 2012 3:52 am    Post subject: Reply with quote

In case someone else has this same problem, I can advise that the macros worked in the end.

I could only get them to work though, by sending very short bursts (0.1s) with NO delay between them.

Cheers
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central