Page 1 of 1
Code for Electric Fireplace Muskoka MFB28-2
Posted: Fri Nov 25, 2011 8:02 am
by mario
1. Device: Muskoka MFB28-2
2. Type of device: Electric Fireplace
3. Year: 2009
4. JP1/UEI Remote model: Atlas OCAP (with learning) / Comcast JP1.3
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? Yes
11. Have you tried the JP1 Lookup Tool? Yes
Probably sold only in Canada...
Remote can be seen in installation manual on page 4:
http://www.homedepot.ca/wcsstore/HomeDe ... ctions.pdf
I'm also willing to try any other fireplace remote codes from other manifacturers... since these China made devices might have been sold under other names using the same control circuits.
Re: Code for Electric Fireplace Muskoka MFB28-2
Posted: Fri Nov 25, 2011 8:51 am
by eferz
mario wrote:I'm also willing to try any other fireplace remote codes from other manifacturers... since these China made devices might have been sold under other names using the same control circuits.
There wasn't an exact match on the Logitech Harmony Database; however, the Greenway MFB28-2 was offered as a conciliatory option. I recorded the signals of the respective device's IR profile using IR Scope & Widget. Since the protocol comes up as <unknown>, perhaps one of our wonderful protocol creators can assist you further.
Posted: Fri Nov 25, 2011 9:25 am
by vickyg2003
Mario, you have a learning remote and a cable, learn the signals and post your IR or RMIR file in the diagnosis section and post a link in this thread. Then we can see if these are similar to the other electric fireplace. Then we can create an upgrade for one or both fireplaces.
Posted: Fri Nov 25, 2011 9:29 am
by eferz
vickyg2003 wrote:Mario, you have a learning remote and a cable, learn the signals and post your IR or RMIR file in the diagnosis section and post a link in this thread. Then we can see if these are similar to the other electric fireplace. Then we can create an upgrade for one or both fireplaces.
I believe this might hinder your request.
mario wrote:6. Still have original remote? No
Posted: Fri Nov 25, 2011 9:34 am
by vickyg2003
Okay, I missed that.
I'll see what we can do.
Posted: Fri Nov 25, 2011 11:07 am
by 3FG
The IRP is
{37.4k,425,msb}<1,-3|3,-1>(A:12,16)+
Of course we don't know how the engineers intended this to be divided, but A can be partitioned to give D:4, F:8 which would give us maximum flexibility.
{37.4k,425,msb}<1,-3|3,-1>(D:4,F:8,16)+
If divided this way, we have D=13, and the OBCs are
Code: Select all
Heat 132 110110000100
Power 136 110110001000
Cooler 130 110110000010
Hotter 129 110110000001
Time 195 110111000011
I'll try using Graham's new executor generating facility in RMIR next.
Posted: Fri Nov 25, 2011 12:10 pm
by 3FG
Test rmdu for Muskoka MFB28-2
This was tested using an Atlas 1056B01, and seems to give the correct signals. Built using RMIR protocol feature.
Posted: Fri Nov 25, 2011 7:53 pm
by mario
Wow!
I am really impressed! So quick to get an answer here, and it simply works!
All I needed to complete it is reassign them where I want.
Thanks!
Posted: Fri Nov 25, 2011 8:29 pm
by 3FG
Good! Thanks, Earl (eferz). I've added the HCS08 executor and moved the upgrade file to Device Upgrades\Misc.
Posted: Sun Nov 27, 2011 8:15 pm
by eferz
3FG wrote:Good! Thanks, Earl (eferz). I've added the HCS08 executor and moved the upgrade file to Device Upgrades\Misc.
You're welcome. Always glad to be of some assistance.