JP1 Remotes

Subject: Yamaha KX-500U

1. Device: Yamaha KX-500U (Remote is RS-K5 or RS-K12)
2. Type of device: Component Cassette Recorder/Player
3. Year: 1988-1990
4. JP1/UEI Remote model: RS 15-2116
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes (KX-800U)
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything

Just for your information in the olden days when cassette decks were in use, Cassette players were grouped in with the Video codes. This upgrade corresponds to Video/0097 in the lookup tool.

https://www.hifi-remote.com/forums/dload ... e_id=10095

The Monitor function didn't decode. If someone has the time to pull this out, could you let me know what the pronto hex looked like.

Edit: I did find time to decode it, but its a partial learn so it is a missing function.

Thank You that worked
Just to let you know I don't need the monitor function anyway (My Deck is the KX-500U which is a two head deck which does not have the monitor function that a three head deck has)

I just mentioned the KX-800U because they were similar models so I assumed it would lead me finding an upgrade (Which it did)

Thanks again

Oh about the Hex codes I don't know what is the exact lines you need so here is the KX-800U files


Decoded CCF File

Plain CCF File

Well for anyone that does need the monitor function, the only thing I can tell from that partial learn is that the OBC is less than 32.

vickyg2003 wrote:Well for anyone that does need the monitor function, the only thing I can tell from that partial learn is that the OBC is less than 32.

I don't know if it helps, but I recorded the signals for the Yamaha KX-800U profile from the Logitech Harmony Database.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10096

Eferz's file has functions not in Vicky's file, and vice versa, so I have added the new functions to Vicky's file. The Tape Monitor function is in there, along with functions for the B deck.

The Robman wrote:Eferz's file has functions not in Vicky's file, and vice versa, so I have added the new functions to Vicky's file. The Tape Monitor function is in there, along with functions for the B deck.

Which one was the "Tape Monitor"? I have to admit that my associative skills failed me on that one.

It was called TAPE in your file.