View previous topic :: View next topic |
Author |
Message |
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Thu Mar 24, 2016 12:15 pm Post subject: RMIR 2.03 build 1 bugs |
|
|
a couple of slight bugs noticed in RMIR 2.03 build 1
I use it on both mac and windows (windows when doing extender development)
On the windows version, if I upload an extended version of a remote to the remote, do some stuff, deactivate the extender and do a 981 reset and then download the remote, the raw data tab still says that I have the extender in even though the signature says it does not. (and the bytes that tell what the extender version are FF FF so the remote is not telling RMIR that it's got the extender)
the extender has a bunch of protocols installed into it for the special devices. I used to see the protocols in the table. They're not there anymore, I don't know if you are hiding them by design or if this is a bug. The devices for these special protocols still show up in the devices tab.
when I build debug versions of my extenders I sometimes put in pre-defined keys in the special protocols tabs so that I can do debugging. In this example I have pre-defined keys for 10-sec and 20-sec pause and the debug version of the extender blinks the LED at the start and end. I use this to ensure that the timing is "roughly" right. when I install the extender file on the windows version they show up. When I install them running on mac they don't.
Windows:
Mac:
these run the same version of RMIR and were done by doing a 981 reset on the remote then loading the same extender hex file. _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Thu Mar 24, 2016 3:03 pm Post subject: |
|
|
Just curious - have you tried to update to build 14 to see if these problems have been fixed? |
|
Back to top |
|
|
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Thu Mar 24, 2016 3:08 pm Post subject: |
|
|
on my list of things to do, but I'm trying to chase down a few final things in the JP1.3 extender 3.04 before I release it (with full support for the 3565 remote) and didn't want to change tools mid-flight _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
|