View previous topic :: View next topic |
Author |
Message |
jwkxneud
Joined: 30 Jan 2004 Posts: 28
|
Posted: Thu Feb 05, 2004 2:58 am Post subject: What does this ccf data mean? |
|
|
I noted that remotecentral has a file for my onkyo TX8211. So I ran it through the decoder. Here's the relevant bit. What's up with the protocol switching between NEC1 and NEC2? I don't know the difference between the two, but this output looks very odd to me. Could this be some error in the ccf decoding, or the learning? Do you think the OEM remote actually uses two protocols?
NEC1 210 109 93 232 Learned SLEEP TX8211 38.0289 34 2
NEC1 210 109 4 180 Learned POWER TX8211 38.0289 34 2
NEC2 210 109 3 187 Learned {Vol-} TX8211 38.0289 0 34
NEC2 210 109 2 183 Learned {Vol+} TX8211 38.0289 0 34
NEC1 210 109 5 184 Learned {Mute} TX8211 38.0289 34 2
NEC1 210 109 8 053 Learned TAPE-1 1 TX8211 38.0289 34 2
NEC1 210 109 7 186 Learned TAPE-2 1 TX8211 38.0289 34 2
NEC1 210 109 11 059 Learned TUNER 1 TX8211 38.0289 34 2
NEC1 210 109 9 057 Learned CD 1 TX8211 38.0289 34 2
NEC1 210 109 10 055 Learned PHONO 1 TX8211 38.0289 34 2
NEC2 210 109 0 181 Learned `Up_Arrow 1 TX8211 38.0289 0 34
NEC2 210 109 1 185 Learned `Down_Arrow 1 TX8211 38.0289 0 34
NEC1 210 109 74 039 Learned GROUP 1 TX8211 38.0289 34 2 |
|
Back to top |
|
|
wwwoholic
Joined: 28 Nov 2003 Posts: 117 Location: Toronto, Canada |
Posted: Thu Feb 05, 2004 4:04 am Post subject: Re: What does this ccf data mean? |
|
|
jwkxneud wrote: | Do you think the OEM remote actually uses two protocols? |
And two sub-devices as well. See Onkyo files at yahoo groups |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Thu Feb 05, 2004 6:25 am Post subject: |
|
|
They use NEC2 for keys, such as vol and arrows, that should repeat while held and NEC1 for keys that shouldn't.
The only difference between NEC1 and NEC2 is the way the key repeats while held. Maybe the device simply understands NEC2 style repeat while held for all keys. Then the remote must disable the repeat while held for most keys by not using NEC2.
I know that if you use NEC1 for VOL etc., the key will fail to repeat while held. I assume that if you use NEC2 for POWER etc., the key will repeat when it shouldn't. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Thu Feb 05, 2004 8:26 am Post subject: |
|
|
You can use the "NEC 2DEV Combo" protocol in KM to handle this. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|