JP1 Remotes

1. Device: GVA GVADVDR1
2. Type of device: DVD recorder
3. Year: 2008
4. JP1/UEI Remote model: URC-7562 B00
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything

This DVD recorder has a MediaTek MT8105DE chipset, and I don't know how to handle Logitech Harmony remote codes.

Is this an Australian unit? I did a search and there's not much info out there about it, so I'm guessing it's an uncommon brand.

NEC1 wrote:1. Device: GVA GVADVDR1
2. Type of device: DVD recorder
3. Year: 2008
4. JP1/UEI Remote model: URC-7562 B00
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything
This DVD recorder has a MediaTek MT8105DE chipset, and I don't know how to handle Logitech Harmony remote codes.

Not exactly sure how the device's chipset comes to play. I think all that matters are the IR signals which triggers specific remote commands. I've recorded the signals from the respective profile on the Logitech Harmony Database, and created the documents below from the respective JP1 tools.

• ICT file: https://www.hifi-remote.com/forums/dload ... le_id=9969
• RMDU file: https://www.hifi-remote.com/forums/dload ... le_id=9970

Not exactly sure how the device's chipset comes to play.

Sometimes we can't find an obscure device like this, but if we find a different brand with the same chipset we can try the codes for that device.

Just FYI, the upgrade that eferz created for this uses NEC1 with device codes 128.247. This is a very rare combination, I see that it's used for SAT/1776 (Jazztel) and SAT/1266 (unknown brand), but the button codes don't match.

eferez, the RMDU codes you linked to work perfectly.

Thank you, eferez.

NEC1 wrote:eferez, the RMDU codes you linked to work perfectly.

Thank you, eferez.

You're welcome, NECe1. I'm glad to have helped you.