JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

URC-7960
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
reinhold



Joined: 10 Jan 2012
Posts: 2

PostPosted: Sat Feb 11, 2012 10:19 pm    Post subject: Reply with quote

Thanks for the Linux version. Unfortunately, it seems that I somehow messed up building the JP1.2/3 serial interface (using the transistor version with the corrected 100k resistor; used with a USB-serial adapter). When I plug in the interface to the remote, the blue ring flashes, but the remote does not work any more and the RemoteMaster application (as well as the test application) does not detect any remote.

So, until I have time to debug my serial interface, I won't be of any help debugging support for the 7960.

Sorry,
Reinhold
Back to top
View user's profile Send private message
damir



Joined: 01 Oct 2003
Posts: 100
Location: Croatia

PostPosted: Sun Feb 12, 2012 6:04 am    Post subject: Reply with quote

When I try to download from URC-7960, RMIR says "No remotes found!",
and blue ring on the remote blinks twice.

I think I have the latest SW version.
Code:
RemoteMaster v2.02 Beta 1.5o
Interfaces:
JP1.X Serial version 0.18f_JP2
JP1 USB version 0.031
JP1 Parallel version 0.02

The label on the remote battery cover says: URC 11-7960 R00.
I have serial interface which works well with JP1.2 and JP1.3 remotes, with IR and RMIR.
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3246

PostPosted: Sun Feb 12, 2012 1:11 pm    Post subject: Reply with quote

damir,
A couple of questions just for background:
Can you do a 983 signature blink back? We expect 32243.
What kind of serial interface is it? If it is homemade, is it made according to a schematic posted here? If it was made by somebody else, who made it?
I think that so far we have only tested the 7960 using the USB interface made by Tommy Tyler.

Have you tried to do a Raw Download?
Back to top
View user's profile Send private message
damir



Joined: 01 Oct 2003
Posts: 100
Location: Croatia

PostPosted: Mon Feb 13, 2012 3:35 am    Post subject: Reply with quote

Quote:
Can you do a 983 signature blink back? We expect 32243.

Signature is 32243.

Quote:
What kind of serial interface is it? If it is homemade, is it made according to a schematic posted here? If it was made by somebody else, who made it?

Homemade interface:


Quote:
Have you tried to do a Raw Download?

Yes, "No remotes found!"
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3970

PostPosted: Mon Feb 13, 2012 11:05 am    Post subject: Reply with quote

Did you move the 7960 RDF to your RDF folder?
Back to top
View user's profile Send private message
damir



Joined: 01 Oct 2003
Posts: 100
Location: Croatia

PostPosted: Mon Feb 13, 2012 1:02 pm    Post subject: Reply with quote

Yes I did.
Back to top
View user's profile Send private message
spalter3



Joined: 15 Feb 2012
Posts: 19

PostPosted: Wed Feb 15, 2012 12:12 pm    Post subject: Reply with quote

hi, i just bought a 7960, built a serial jp1.2/3 interface according to tommy tyler's transistor schematics and have the exact same problem damir is having Sad

anyone any ideas?
Back to top
View user's profile Send private message
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Wed Feb 15, 2012 1:16 pm    Post subject: Reply with quote

Someone correct me if this is unrelated but this was written in another thread.

Tommy Tyler wrote:
You can use a JP1.2 cable on a JP1.3 remote by disabling pin 5, but it is still a JP1.2 cable.

However, I do not see pin 5 listed on the JP1.2 schematic above except on the DB9 side. It just might be as a matter of contention that the current tools being used in beta for JP1.4 and 2.x remotes have only been tested around Tommy Tylers' USB Interface Cable for Flash Remotes (JP1.2 and JP1.3)

3FG wrote:
I think that so far we have only tested the 7960 using the USB interface made by Tommy Tyler.

_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
spalter3



Joined: 15 Feb 2012
Posts: 19

PostPosted: Wed Feb 15, 2012 2:14 pm    Post subject: Reply with quote

do we maybe need to change a resistor? are the jp1.2/3 remotes also 3v? or is there a program beyond the jp1xtest that can tell me if anything is happening on the rx pin of my com port, because judging by the 2 flashes something is at least being sent to the remote.
Back to top
View user's profile Send private message
spalter3



Joined: 15 Feb 2012
Posts: 19

PostPosted: Thu Feb 16, 2012 2:40 am    Post subject: Reply with quote

btw: i'm running windows 7 x64, is it possible that that's the problem?
Back to top
View user's profile Send private message
spalter3



Joined: 15 Feb 2012
Posts: 19

PostPosted: Thu Feb 16, 2012 3:34 am    Post subject: Reply with quote

ok, that's not the problem, i tried with a xp 32bit vm, same problem. i also tried a prolific usb-to-serial instead of the onboard serial, also no luck Sad
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3246

PostPosted: Fri Feb 17, 2012 12:18 am    Post subject: Reply with quote

damir,
Would you mind downloading Portmon http://technet.microsoft.com/en-us/sysinternals/bb896644 and trying a Raw Download with it attached? Start RMIR, start PortMon, make sure that Options/ShowHex is set, use Capture/Ports /COMx to select your port, and initiate a Raw Download. Use Edit Copy to get the resulting data into a file and post it here in the Diagnostics Section. Maybe we can guess where things are going wrong.

Output should look something like: (but longer)
Code:
0.00000168   javaw.exe   IOCTL_SERIAL_GET_HANDFLOW   VCP0   SUCCESS      
0.00092246   javaw.exe   IOCTL_SERIAL_SET_BAUD_RATE   VCP0   SUCCESS   Rate: 38400   
0.00091995   javaw.exe   IOCTL_SERIAL_SET_RTS   VCP0   SUCCESS      
0.00098253   javaw.exe   IOCTL_SERIAL_SET_DTR   VCP0   SUCCESS      
0.00097945   javaw.exe   IOCTL_SERIAL_SET_LINE_CONTROL   VCP0   SUCCESS   StopBits: ERROR Parity: NONE WordLength: 8   
0.00000196   javaw.exe   IOCTL_SERIAL_SET_CHAR   VCP0   SUCCESS   EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13   
0.00096353   javaw.exe   IOCTL_SERIAL_SET_HANDFLOW   VCP0   SUCCESS   Shake:1 Replace:40 XonLimit:2048 XoffLimit:512   
0.00000196   javaw.exe   IOCTL_SERIAL_SET_TIMEOUTS   VCP0   SUCCESS   RI:50 RM:10 RC:50 WM:10 WC:50   

BTW, Portmon doesn't run on 64 bit Windows.
Back to top
View user's profile Send private message
spalter3



Joined: 15 Feb 2012
Posts: 19

PostPosted: Fri Feb 17, 2012 4:23 am    Post subject: Reply with quote

at least now i know that my cable is working, since it's actually reading data...

Code:

0.13595136   javaw.exe   IRP_MJ_CREATE   ProlificSerial2   SUCCESS   Options: Open    
0.00001090   javaw.exe   IOCTL_SERIAL_GET_BAUD_RATE   ProlificSerial2   SUCCESS      
0.00000950   javaw.exe   IOCTL_SERIAL_GET_LINE_CONTROL   ProlificSerial2   SUCCESS      
0.00000922   javaw.exe   IOCTL_SERIAL_GET_CHARS   ProlificSerial2   SUCCESS      
0.00000922   javaw.exe   IOCTL_SERIAL_GET_HANDFLOW   ProlificSerial2   SUCCESS      
0.00000922   javaw.exe   IOCTL_SERIAL_GET_BAUD_RATE   ProlificSerial2   SUCCESS      
0.00000894   javaw.exe   IOCTL_SERIAL_GET_LINE_CONTROL   ProlificSerial2   SUCCESS      
0.00000894   javaw.exe   IOCTL_SERIAL_GET_CHARS   ProlificSerial2   SUCCESS      
0.00000894   javaw.exe   IOCTL_SERIAL_GET_HANDFLOW   ProlificSerial2   SUCCESS      
0.05223290   javaw.exe   IOCTL_SERIAL_SET_BAUD_RATE   ProlificSerial2   SUCCESS   Rate: 38400   
0.00295987   javaw.exe   IOCTL_SERIAL_SET_RTS   ProlificSerial2   SUCCESS      
0.00294088   javaw.exe   IOCTL_SERIAL_SET_DTR   ProlificSerial2   SUCCESS      
0.00404549   javaw.exe   IOCTL_SERIAL_SET_LINE_CONTROL   ProlificSerial2   SUCCESS   StopBits: ERROR Parity: NONE WordLength: 8   
0.00194382   javaw.exe   IOCTL_SERIAL_SET_CHAR   ProlificSerial2   SUCCESS   EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13   
0.00001034   javaw.exe   IOCTL_SERIAL_SET_HANDFLOW   ProlificSerial2   SUCCESS   Shake:1 Replace:40 XonLimit:2048 XoffLimit:512   
0.00000950   javaw.exe   IOCTL_SERIAL_SET_TIMEOUTS   ProlificSerial2   SUCCESS   RI:50 RM:10 RC:50 WM:10 WC:50   
0.00278248   javaw.exe   IOCTL_SERIAL_SET_RTS   ProlificSerial2   SUCCESS      
0.00293641   javaw.exe   IOCTL_SERIAL_CLR_RTS   ProlificSerial2   SUCCESS      
0.00097778   javaw.exe   IRP_MJ_WRITE   ProlificSerial2   SUCCESS   Length 4: 00 02 51 53    
0.00201618   javaw.exe   IRP_MJ_READ   ProlificSerial2   SUCCESS   Length 4: 00 00 00 02    
0.00099342   javaw.exe   IRP_MJ_WRITE   ProlificSerial2   SUCCESS   Length 4: 00 02 50 52    
0.05536011   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 10: 00 02 00 06 00 01 04 4B 80 C8    
0.00098476   javaw.exe   IRP_MJ_WRITE   ProlificSerial2   SUCCESS   Length 8: 00 06 01 01 04 00 2C 2E    
0.05848313   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 4: 00 02 03 01    
0.00295764   javaw.exe   IOCTL_SERIAL_SET_RTS   ProlificSerial2   SUCCESS      
0.00000978   javaw.exe   IOCTL_SERIAL_SET_BREAK_OFF   ProlificSerial2   SUCCESS      
0.00296518   javaw.exe   IOCTL_SERIAL_CLR_DTR   ProlificSerial2   SUCCESS      
0.00297328   javaw.exe   IOCTL_SERIAL_SET_BREAK_ON   ProlificSerial2   SUCCESS      
0.00295484   javaw.exe   IOCTL_SERIAL_SET_DTR   ProlificSerial2   SUCCESS      
0.00310179   javaw.exe   IOCTL_SERIAL_SET_BREAK_OFF   ProlificSerial2   SUCCESS      
0.04952082   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 2: 00 00    
0.00096772   javaw.exe   IRP_MJ_WRITE   ProlificSerial2   SUCCESS   Length 1: 45    
0.05844542   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 0:    
0.00316884   javaw.exe   IOCTL_SERIAL_CLR_RTS   ProlificSerial2   SUCCESS      
0.00000978   javaw.exe   IOCTL_SERIAL_SET_BREAK_OFF   ProlificSerial2   SUCCESS      
0.00293194   javaw.exe   IOCTL_SERIAL_CLR_DTR   ProlificSerial2   SUCCESS      
0.00287299   javaw.exe   IOCTL_SERIAL_SET_BREAK_ON   ProlificSerial2   SUCCESS      
0.00295065   javaw.exe   IOCTL_SERIAL_SET_DTR   ProlificSerial2   SUCCESS      
0.00290763   javaw.exe   IOCTL_SERIAL_SET_BREAK_OFF   ProlificSerial2   SUCCESS      
0.24571084   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 0:    
0.00095515   javaw.exe   IRP_MJ_WRITE   ProlificSerial2   SUCCESS   Length 1: 45    
0.05844346   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 0:    
0.00296574   javaw.exe   IOCTL_SERIAL_CLR_DTR   ProlificSerial2   SUCCESS      
0.00287187   javaw.exe   IOCTL_SERIAL_SET_RTS   ProlificSerial2   SUCCESS      
0.00294227   javaw.exe   IOCTL_SERIAL_SET_DTR   ProlificSerial2   SUCCESS      
0.00299256   javaw.exe   IOCTL_SERIAL_CLR_RTS   ProlificSerial2   SUCCESS      
0.04958479   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 1: 00    
0.00099035   javaw.exe   IRP_MJ_WRITE   ProlificSerial2   SUCCESS   Length 1: 45    
0.05847810   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 0:    
0.00325768   javaw.exe   IOCTL_SERIAL_SET_BREAK_ON   ProlificSerial2   SUCCESS      
0.00184968   javaw.exe   IOCTL_SERIAL_SET_RTS   ProlificSerial2   SUCCESS      
0.00316521   javaw.exe   IOCTL_SERIAL_CLR_RTS   ProlificSerial2   SUCCESS      
0.00308419   javaw.exe   IOCTL_SERIAL_SET_BREAK_OFF   ProlificSerial2   SUCCESS      
0.04944455   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 1: 00    
0.00109818   javaw.exe   IRP_MJ_WRITE   ProlificSerial2   SUCCESS   Length 1: 45    
0.06825448   javaw.exe   IRP_MJ_READ   ProlificSerial2   TIMEOUT   Length 0:    
0.00001090   javaw.exe   IOCTL_SERIAL_GET_BAUD_RATE   ProlificSerial2   SUCCESS      
0.00000950   javaw.exe   IOCTL_SERIAL_GET_LINE_CONTROL   ProlificSerial2   SUCCESS      
0.00000922   javaw.exe   IOCTL_SERIAL_GET_CHARS   ProlificSerial2   SUCCESS      
0.00000922   javaw.exe   IOCTL_SERIAL_GET_HANDFLOW   ProlificSerial2   SUCCESS      
0.05940867   javaw.exe   IOCTL_SERIAL_SET_BAUD_RATE   ProlificSerial2   SUCCESS   Rate: 1200   
0.00304899   javaw.exe   IOCTL_SERIAL_SET_RTS   ProlificSerial2   SUCCESS      
0.00289590   javaw.exe   IOCTL_SERIAL_SET_DTR   ProlificSerial2   SUCCESS      
0.00394212   javaw.exe   IOCTL_SERIAL_SET_LINE_CONTROL   ProlificSerial2   SUCCESS   StopBits: 1 Parity: NONE WordLength: 7   
0.00299144   javaw.exe   IOCTL_SERIAL_SET_CHAR   ProlificSerial2   SUCCESS   EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13   
0.00001006   javaw.exe   IOCTL_SERIAL_SET_HANDFLOW   ProlificSerial2   SUCCESS   Shake:1 Replace:40 XonLimit:2048 XoffLimit:512   
0.03656973   javaw.exe   IRP_MJ_CLEANUP   ProlificSerial2   SUCCESS      
1.18213712   javaw.exe   IRP_MJ_CLOSE   ProlificSerial2   SUCCESS      


is there a document somewhere on how jp1.4 is supposed to work/what the hex values mean?
Back to top
View user's profile Send private message
damir



Joined: 01 Oct 2003
Posts: 100
Location: Croatia

PostPosted: Fri Feb 17, 2012 12:27 pm    Post subject: Reply with quote

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10688
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3246

PostPosted: Sat Feb 18, 2012 1:18 am    Post subject: Reply with quote

damir,
I'm traveling and probably won't be able to work on this until Monday. The problem is 2 extraneous bytes (00 00) are being received by the computer. I'm not sure what to try to fix it, and I don't have access to compiler right now anyway.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
Page 4 of 10

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central