JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Yamaha YMC-700

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Mon Oct 31, 2011 6:10 pm    Post subject: Yamaha YMC-700 Reply with quote

Curious, I was using IR Scope trying to learn IR signals for the Yamaha YMC-700 and I've come across a curios protocol, "NEC1-y1". So, I'm not sure which protocol to use. There are three dev/sub listed 127.1, 122, and 126 and the two protocols are NEC1-y1 and NEC1.

I've uploaded the ICT file here: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10071
_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3246

PostPosted: Mon Oct 31, 2011 6:21 pm    Post subject: Reply with quote

You can use the NEC 4DEV Yamaha Combo executor, and see the notes in RM.

Of course, reading the info in DecodeIR.html might also help......
Back to top
View user's profile Send private message
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Tue Nov 01, 2011 8:50 pm    Post subject: Reply with quote

3FG wrote:
You can use the NEC 4DEV Yamaha Combo executor, and see the notes in RM.

Of course, reading the info in DecodeIR.html might also help......


Awesome, thanks! I keep meaning to read that doc, I need to just set aside some time to actually read it.
_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3246

PostPosted: Tue Nov 01, 2011 9:33 pm    Post subject: Reply with quote

Well, I didn't mean to read it like a book. But when DecodeIR provides a decode that isn't clear, like NEC1 with a y1 suffix, open up decodeIR.html, click on the NEC link at the top of the document, and read what it has to say. That's the intent of DecodeIR.html: it provides additional information about decodes.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central