Pace TDS865COS Remote Control

QatariMan · Post by **QatariMan** » Tue Jul 12, 2011 12:47 pm

Please I need help i need Pace TDS865COS Remote Control custom code for slingbox Pro HD i can't find it

Post by **vickyg2003** » Tue Jul 12, 2011 1:30 pm

Alan is on holiday, so I'm going to see if I can help

We have an upgrade for the Pace 865 NSDX here
https://www.hifi-remote.com/forums/dload ... le_id=8851

But according to this post
http://www.remotecentral.com/cgi-bin/mb ... d.cgi?4147
the Device numbers are different. 39.86

So apparently if you open that rmdu file you can change Device to 39 and the OEM2 to 86 and create a bin file.

Now if that works or doesn't work we need some feedback from you. You should post the results here and upload your working rdmu file in to the file section.

Its considered rude not to leave feedback. The slingboxers usually don't seem to understand that. That's why Alan usually takes care of this forum area.

EDIT:
ooPS I said 89 when I read 86. I've corrected this post to say 86.

alanrichey · Post by **alanrichey** » Thu Jul 14, 2011 9:01 am

Back from holiday today

I've had a look and I reckon the device is 39.86

Built the remote on those values and uploaded to https://www.hifi-remote.com/forums/dload ... le_id=9743

Any good ?

QatariMan · Post by **QatariMan** » Sat Jul 16, 2011 9:35 am

welcome back alanrichey

QatariMan · Post by **QatariMan** » Sat Jul 16, 2011 9:54 am

Thank UUUUUUU alanrichey \(^O^)/ its working

alanrichey · Post by **alanrichey** » Sat Jul 16, 2011 11:18 am

Good, I'll upload it

Alaa_ist · Post by **Alaa_ist** » Sun Aug 19, 2012 5:32 pm

hi Alan,
i believe you are the right expert to ask,
i have a samsung tv which comes with a smart remote control which can control any STB, but i'm not able to make it able to control the pace tds865cos becouse when i'm trying to choose a model number i have all the tds options except the tds865cos is not one of them so do you know which one i have to choose to make it work ? ( if it's posible )

please help

alanrichey · Post by **alanrichey** » Sun Aug 19, 2012 5:57 pm

Afraid I can't help. Of the 600+ remotes I have built this one uses a set of codes (IR Protocl - MCE, Device 39.86) that I haven't found in any other device.

Sorry

Alaa_ist · Post by **Alaa_ist** » Sun Aug 19, 2012 6:06 pm

thank you anyway