JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

TEDELEX EC-PD 2000
Goto page 1, 2, 3  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
kamal



Joined: 02 Jul 2011
Posts: 11
Location: South Africa

PostPosted: Sat Jul 02, 2011 2:27 am    Post subject: TEDELEX EC-PD 2000 Reply with quote

hi i am trying to find the hex file for a Tedelex EC-PD 2000 or any universal code or a rdf file please i appreciate all help thanks.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sat Jul 02, 2011 6:40 am    Post subject: Reply with quote

We need a lot more information before the volunteers here can help you. Start by filling out the required template and add any more information that you can.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
kamal



Joined: 02 Jul 2011
Posts: 11
Location: South Africa

PostPosted: Sat Jul 02, 2011 7:35 am    Post subject: Reply with quote

1. Device: EC-PD 2000
2. Type of device: Plasma monitor
3. Year: 2004 not sure
4. JP1/UEI Remote model:unknown
5. Do you have a JP1 cable? no
6. Still have original remote? no
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)?yes
9. Partially working setup code? none
10. Learning remote question?N/A
11. Have you tried the JP1 Lookup Tool?yes, i did not find anything
\


sorry i forgot to request in this format.

thanks for all your assistance

kind regards

Kamal
Kamal
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sat Jul 02, 2011 9:54 am    Post subject: Reply with quote

OK, I give up.

Are you looking for pronto hex?

What are you going to do with it? IE do you have a philips pronto?

You used the lookup tool and found a whole bunch of teledex tv's, did you try any of these ? Obviously not, since you don't have a UEI remote as far as I can tell.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
kamal



Joined: 02 Jul 2011
Posts: 11
Location: South Africa

PostPosted: Sat Jul 02, 2011 12:10 pm    Post subject: Reply with quote

heres an example of wat i am looking for this it a control for HD PVR pace model number TDS 850 say for power the hex code is
0000 006D 0012 0012 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 006A 0008 001D 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0041 0008 0046 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2
this will power on n off the device i convert the hex codes into rdf file format.i use ir shell on my psp to be my universal remote.now all i need is the hex codes of the tedelex EC-PD 2000 then i will create a rdf file. dono if this makes ant sense to you.
thanks you

cheers

Kamal
Back to top
View user's profile Send private message
cauer29



Joined: 03 Feb 2010
Posts: 235

PostPosted: Sat Jul 02, 2011 1:52 pm    Post subject: Reply with quote

kamal wrote:
heres an example of wat i am looking for this it a control for HD PVR pace model number TDS 850 say for power the hex code is
0000 006D 0012 0012 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 006A 0008 001D 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0041 0008 0046 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2
this will power on n off the device i convert the hex codes into rdf file format.i use ir shell on my psp to be my universal remote.now all i need is the hex codes of the tedelex EC-PD 2000 then i will create a rdf file. dono if this makes ant sense to you.
thanks you

cheers

Kamal


One small point of confusion. On this forum, the term rdf file refers to a file describing a JP1 remote control. The way you're using the term, it's clear that it refers to a file containing pronto hex and is used with a Sony PSP to send IR cmds to various equipment.

That said, using the lookup tool, there are numerous Tedelex TVs listed with a lot of different protocols used. The most common being NECx1 14.14 and RC5 0.

Here's RC5 dev 0 power key:

0000 0073 0000 000C 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0040 0020 0020 0040 0020 0020 0CE0

And here's NECx1 dev 14.14 power key:

0000 006D 0022 0003 00AC 00AB 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0689 00AC 00AB 0015 0041 0015 0E3F

Let us know if either of those work. If they do, then we have a starting point and can add more codes from there.

A.A.
Back to top
View user's profile Send private message
kamal



Joined: 02 Jul 2011
Posts: 11
Location: South Africa

PostPosted: Sat Jul 02, 2011 2:35 pm    Post subject: Reply with quote

iv added them to the psp but still nothing Sad

thanks alot appreciate your help.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sat Jul 02, 2011 2:39 pm    Post subject: Reply with quote

cauer29, there is one more that looks like a good candidate.
Can you do the make hex for Nec1 0.127 OBC 10.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sat Jul 02, 2011 3:20 pm    Post subject: Reply with quote

Nevermind, I figured out how to use makehex.

Here is the Nec1 0.127 OBC 10

0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94

Might as well try Nec1 56 OBC 28

0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94

and
RECS80_45 Device 7 OBC 32
0000 006D 0000 000C 0006 011B 0006 00BB 0006 011B 0006 011B 0006 011B 0006 011B 0006 00BB 0006 00BB 0006 00BB 0006 00BB 0006 00BB 0006 07CB

and
Proton Device 2 OBC 14
0000 006D 0000 0013 0130 0098 0013 0013 0013 0039 0013 0013 0013 0013 0013 0013 0013 0013 0013 0013 0013 0013 0013 0098 0013 0013 0013 0039 0013 0039 0013 0039 0013 0013 0013 0013 0013 0013 0013 0013 0013 0358
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
kamal



Joined: 02 Jul 2011
Posts: 11
Location: South Africa

PostPosted: Sun Jul 03, 2011 1:03 am    Post subject: Reply with quote

none of those work

thank you.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sun Jul 03, 2011 1:52 am    Post subject: Reply with quote

Too bad. Those were the easiest to work with

We have 5 more possibilities from the lookup table, and then we are out of luck. The next 5 will be more difficult to figure out since we can't use makehex.

Have you contacted the manufacturer? Sometimes they will give you the technical assistance in a hex format that we can decipher.

Also do you have any universal remotes that have code search capabilities? You might get lucky and have your monitor react to one of those signals.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
cauer29



Joined: 03 Feb 2010
Posts: 235

PostPosted: Sun Jul 03, 2011 9:38 am    Post subject: Reply with quote

vickyg2003 wrote:
Too bad. Those were the easiest to work with

We have 5 more possibilities from the lookup table, and then we are out of luck. The next 5 will be more difficult to figure out since we can't use makehex.

Have you contacted the manufacturer? Sometimes they will give you the technical assistance in a hex format that we can decipher.

Also do you have any universal remotes that have code search capabilities? You might get lucky and have your monitor react to one of those signals.


There is Aiwa 284:

Aiwa
Device Code: 28.1 Function: 18
0000 006D 002C 0002 014F 00A7 0015 0015 0015 0015 0015 003F 0015 003F 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 0015 0015 003F 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 003F 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 003F 0015 0015 0015 003F 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 003F 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 036E 014F 00A7 0015 0D7B

So, that should leave just pids $003D, $00F3, $011E. What's the 5th one?

A.A.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sun Jul 03, 2011 10:54 am    Post subject: Reply with quote

cauer29 wrote:

There is Aiwa 284:

Aiwa
Device Code: 28.1 Function: 18
0000 006D 002C 0002 014F 00A7 0015 0015 0015 0015 0015 003F 0015 003F 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 0015 0015 003F 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 003F 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 003F 0015 0015 0015 003F 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 003F 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 036E 014F 00A7 0015 0D7B



I didn't know how to figure out Aiwa.


Quote:

So, that should leave just pids $003D, $00F3, $011E. What's the 5th one?

A.A.


There was a nec1 dev 4 that we don't have power efc for. That one could use a makehex.

I'll find a remote with the other three and shoot them at the widget.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sun Jul 03, 2011 11:33 am    Post subject: Reply with quote

here are some codes from some of the others

This is RC5 at a higher frequency
TV 1699

Protocol=RC5 Device=0 OBC=12 (Pronto from signal) Power
0000 006A 0000 000C 0020 0020 0041 001F 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 003F 0020 0020 0041 001F 0020 0CCB
Protocol=RC5 Device=0 OBC=13 (Pronto from signal) Mute
0000 0069 0000 000C 0020 0021 0020 0021 0041 0020 0020 0021 0020 0021 0020 0021 0020 0021 0020 0021 0020 0040 0020 0021 0041 0040 0020 0CCB
Protocol=RC5 Device=0 OBC=9 (Pronto from signal) number 9
0000 006A 0000 000C 0020 0020 0020 0020 0041 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 003F 0041 0020 0020 003F 0020 0CAB

This is an unknown oddball protocol

TV 0217
Protocol=<unknown> (Pronto from signal) power
0000 019F 0006 0007 0001 0002 0005 0002 0001 0002 0005 0002 0001 0002 0001 0430 0001 0002 0005 0002 0001 0002 0001 0002 0005 0002 0001 0002 0001 0430
Protocol=<unknown> (Pronto from signal) mute
0000 019F 0000 0006 0001 0003 0005 0003 0001 0001 0001 0003 0005 0003 0001 0430
Protocol=<unknown> (Pronto from signal) nine
0000 019F 0000 0006 0002 0003 0005 0002 0002 0003 0002 0003 0002 0003 0001 035A

That leaves TV/1218 with the Nec1 4 signal and the

TV/0431 which has a protocol only found in european remotes.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6954
Location: Florida

PostPosted: Sun Jul 03, 2011 2:14 pm    Post subject: Reply with quote

I don't have very complete information for the TV 1218, the Nec 4 code so it might be best to try some numbers and some volume keys.

Device Code: 4 Function: 141 number 8
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0E94

Device Code: 4 Function: 142 number 9
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0E94

Device Code: 4 Function: 252 volume -
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94

Device Code: 4 Function: 253 volume +
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94


Kamal, When i read this thread again, I see that you have a pace pvr. Some of the Pace's shipped with UEI remotes. Is yours a UEI remote and if so have you tried a code search with it?
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Goto page 1, 2, 3  Next
Page 1 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central