JP1 Remotes

Hi
I've found the Denon 3200 IR text but I need one more button HDMI Monitor output select.Here's the code I've learned.But it's not a Denon combo.Thanks for your help.Darryl

# Protocol Device sub-device OBC hex cmd EFC MISC
1 Kayseikyo-84.50 4 17 47 0B 090 E=14

Frequency 38461

Sent repeatedly While key is being held

+3354 -1678 +416 -422 +416 -422 +416 -1260 +416 -422 +416 -1260 +416 -422 +416 -1260 +416 -422 +416 -422 +416 -1260 +416 -422 +416 -422 +416 -1260 +416 -1260 +416 -422 +416 -422 +416 -422 +416 -422 +416 -422 +416 -422 +416 -422 +416 -422 +416 -1260 +416 -422 +416 -1260 +416 -422 +416 -422 +416 -422 +416 -1260 +416 -422 +416 -422 +416 -422 +416 -1260 +416 -1260 +416 -1260 +416 -1260 +416 -422 +416 -1260 +416 -422 +416 -422 +416 -422 +416 -1260 +416 -1260 +416 -1260 +416 -1260 +416 -1260 +416 -1260 +416 -422 +416 -74182

I think your tools are out of date. This decodes as a Denon-K with the current tools.

Denon K Device 4 sub/zone 1 OBC 753

I don't think you can use this in a Denon Combo upgrade, but I don't have much experience with the Denon protocols. I think you'll need to create a helper upgrade using the Denon-K protocol. RM has the Denon K, although I think you can do this using Kaseikyo in KM.

Make sure you are using the latest and greatest tools.

I've finally got the 2 HDMI outputs to both work.Thanks for your concern.Darryl