JP1 Remotes

[waltj2k]

I recently purchased a Panasonic RP91 DVD player.

I have a 15-1994 and I attempted to upgrade the code. I checked the yahoo group for a file and low and behold there was one there.

http://groups.yahoo.com/group/jp1/files/3.%20Device%20Codes/DVD/Panasoinc%20RP91%20DVD%20Player%20for%20URC-9910

However it is for the URC 9910. I tried it and it doesn't work correctly. Ex. pressing play doesn't start the disc it starts another function. I checked the buttons section on Keymap and didn't see anything odd.

How do I convert this code from the URC 9910 to be used on the 15-1994?

This is my 1st post. Great forum it has helped quite a bit. I have had the 15-1994 since 2000. Great remote I am just getting into the JP1 aspects.

Thanks

Walt

[Mark Pierson]

Welcome to JP1!

For starters, plaes read the Posting links to Yahoo files message. I have corrected your link above.

To use that file in your 1994, you need to LOAD it into KM, change the remote to 15-1994, check the button assignments on the Buttons sheet, and then copy & paste the Device Upgrade Code into IR.
_________________
Mark

[waltj2k]

I think I did do that. I will double check my work and let you know how it goes.

Walt

[Mark Pierson]

I just took a look at that file. It appears that the creator didn't rename the functions to the actual names, but instead referenced them in the Notes column. I just re-did the file (based on the 1994 remote), changing the function names and button assignments so that they now make sense. Try downloading it again and give it another try.

Panasonic DVD-RP91D DVD Player
_________________
Mark

[waltj2k]

Wow Mark,

That is a huge help. I will download and upgrade the remote. Big thanks in advance.

Walt

[waltj2k]

Mark,

Works like a champ. Thanks for the help. Now I can get back to enjoying my system. Thanks

Walt