View previous topic :: View next topic |
Author |
Message |
Mr Z|P
Joined: 25 Sep 2003 Posts: 12
|
Posted: Tue Sep 30, 2003 4:22 am Post subject: replay showstopper remote |
|
|
Is there anyway I could somehow run a all power off macro with this remote. There are no extenders available, and no macro section in the default RDF.
But the remote does accept new device codes, is there a way to have it send multiple codes using this. I'd hate to have to stash this remote away. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Sep 30, 2003 7:25 am Post subject: |
|
|
I've never got around to trying it, but you could see if the DSM (Device Specific Macro) special protocol works with this remote. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Mr Z|P
Joined: 25 Sep 2003 Posts: 12
|
Posted: Tue Sep 30, 2003 1:03 pm Post subject: |
|
|
According to the docs you still need to be able to map a macro on a phantom key. IR does not have a Macro tab after reading in the remote current config. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Sep 30, 2003 2:34 pm Post subject: |
|
|
IR knows that the Replay remotes don't support macros, so it doesn't display the Macro panel. For your experiments, to enable Macros in IR.exe just delete this line from the RDF...
MacroSupport=0 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Mr Z|P
Joined: 25 Sep 2003 Posts: 12
|
Posted: Tue Sep 30, 2003 2:56 pm Post subject: |
|
|
Last quick question, what are the hex values for Phantom1=, Phantom2, Phantom3, Phantom4 for the replay (showstopper remote)
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Sep 30, 2003 3:18 pm Post subject: |
|
|
Phantoms can use whatever spare button codes you like. In this case, the RDF has them defined as using decimal codes 60 thru 63, which in hex is $3C, $3D, $3E and $3F.
Just FYI, if you ever want to convert a decimal number to hex yourself, you can do this using the Windows Calculator. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Mr Z|P
Joined: 25 Sep 2003 Posts: 12
|
Posted: Tue Sep 30, 2003 3:51 pm Post subject: |
|
|
Ok well I don't think it works, I copied the protocol from a different extender remote (not sure if this matters) I get a very quick blink on my macro key. So I'm assuming it got remapped, but I'm not getting the results. I'll throw a dump up on jp1, hopefully someone could spot a problem. |
|
Back to top |
|
|
Mr Z|P
Joined: 25 Sep 2003 Posts: 12
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Sep 30, 2003 8:33 pm Post subject: |
|
|
I don't know where you got that protocol code from, but it's not the right code. The correct code is in the special-protocols spreadsheet. However, I tried it and it doesn't appear to work.
I tried using the original version of the DSM protocolbut this required that you feed it the register that's used to monitor macros, and of course, the Replay remote doesn't have such a register.
Oh well. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Mr Z|P
Joined: 25 Sep 2003 Posts: 12
|
Posted: Tue Sep 30, 2003 8:48 pm Post subject: |
|
|
Well thanks for looking into it, anyway. |
|
Back to top |
|
|
|