JP1 Remotes

I'm looking for a code for a Curtis VCR DVD Combo model # DVD7600. Thanks Stephen

Hi

Please read this post carefully: http://www.hifi-remote.com/forums/viewtopic.php?t=49
and, after following all the steps it explains, edit your post to include all of the required information in the template so that someone can help you.

This post indicates that you used to have a learning capable remote, and this one indicates that you used to have an interface cable.

If you still have both these things in working order, and your original device remote, then you can just follow this procedure:
Wiki:How Do You Create An Upgrade From Scratch
to build your own upgrade.

If you do that, please don't forget to upload the working upgrade file back here to the file section, for others to share...

gestereo wrote:1. Curtis DVD7600
4. JP1/UEI Remote model: URC-9910
5. Do you have a JP1 cable? y

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: http://www.hifi-remote.com/forums/dload ... e_id=10658
• RMDU file: http://www.hifi-remote.com/forums/dload ... e_id=10659