| View previous topic :: View next topic |
| Author |
Message |
dghboy315
Joined: 16 Feb 2011
Posts: 4
|
 Posted: Wed Feb 16, 2011 5:58 pm Post subject: Kenwood VR-6070 |
 |
|
1. Device: Kenwood VR-6070
2. Type of device: Audio receiver
3. Year: ?
4. JP1/UEI Remote model: RCA RCRP05B - I think it is JP1
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Did not understand how to use files
8. Checked Pronto file section (at R/C)? Did not understand
9. Partially working setup code? Yes
10. Learning remote question? ?
I've tried all Kenwood codes from the manuals and from the code list on this site, but the remote only turns the device on/off. No other functions work. I've tried code search but stopped after a few hundred with no results. I've searched all over this site, but I don't understand everything.
All I really want it to do is control the volume on the receiver. Can someone please at least point me in the right direction. Thanks. |
|
| Back to top |
|
 |
mdavej
Expert
Joined: 08 Oct 2003
Posts: 4523
|
| Posted: Wed Feb 16, 2011 6:58 pm Post subject: |
|
|
| If you press AUD then one of the VOL buttons, which device buttons light up (TV or AUD)? Which code worked for turning it on and off? |
|
| Back to top |
|
|
dghboy315
Joined: 16 Feb 2011
Posts: 4
|
| Posted: Wed Feb 16, 2011 7:21 pm Post subject: |
|
|
| mdavej wrote: | | If you press AUD then one of the VOL buttons, which device buttons light up (TV or AUD)? Which code worked for turning it on and off? |
TV lights up when the VOL buttons are pressed, but no other functions for the receiver work either. I tried holding down the AUD button while pressing the VOL buttons but that didn't work. Most of the codes allow work to turn the Kenwood on/off.
1313
1570
1569
0027
0077
0313 |
|
| Back to top |
|
|
mdavej
Expert
Joined: 08 Oct 2003
Posts: 4523
|
| Posted: Wed Feb 16, 2011 7:32 pm Post subject: |
|
|
| Press AUD, hold Setup for 2 blinks, 993, VOL+ (4 blinks). If that doesn't fix it, post back. |
|
| Back to top |
|
|
dghboy315
Joined: 16 Feb 2011
Posts: 4
|
| Posted: Thu Feb 17, 2011 9:04 pm Post subject: |
|
|
| mdavej wrote: | | Press AUD, hold Setup for 2 blinks, 993, VOL+ (4 blinks). If that doesn't fix it, post back. |
After entering 933, AUD blinks twice, only 1 blink after VOL+
it still only changes vol of TV |
|
| Back to top |
|
|
3FG
Expert
Joined: 19 May 2009
Posts: 3371
|
| Posted: Thu Feb 17, 2011 9:31 pm Post subject: |
|
|
The RCA RCRP05B VPT and channel lock work differently from most UEI remotes, and from its own instruction sheet.
See this thread.
To make Audio the VPT device,
1. PRESS Setup until 2 blinks.
2. TAP 9 9 3. Two blinks.
3. TAP Vol+
4. TAP the Audio button. Two blinks.
If desired, you can setup more involved VPT arrangements, as detailed in the above thread |
|
| Back to top |
|
|
dghboy315
Joined: 16 Feb 2011
Posts: 4
|
| Posted: Fri Feb 18, 2011 7:35 pm Post subject: |
|
|
| 3FG wrote: | The RCA RCRP05B VPT and channel lock work differently from most UEI remotes, and from its own instruction sheet.
See this thread.
To make Audio the VPT device,
1. PRESS Setup until 2 blinks.
2. TAP 9 9 3. Two blinks.
3. TAP Vol+
4. TAP the Audio button. Two blinks.
If desired, you can setup more involved VPT arrangements, as detailed in the above thread |
It worked! Thanks. You all rock! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
