View previous topic :: View next topic |
Author |
Message |
r3acer
Joined: 02 Mar 2014 Posts: 3
|
Posted: Sun Mar 02, 2014 11:21 am Post subject: TWC Atlas 1056B01 - 3330 RDF |
|
|
I got a Time Warner Cable Atlas 1056B01 remote after reading that it's one of the supported remotes that's been around for a while, but when I click on "Download from remote" in RMIR I get an error message saying "No RDF matches signature starting 3330".
Doing a raw download and trying to open it in IR produces a message that "no definition file could be found for this remote (333033S*)". That last character after S is some garbled character that I can't even reproduce (could screenshot if that helps).
This is the raw download off this remote:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12404
Thoughts? I'm new to this and any help would be appreciated. Thanks. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
|
Back to top |
|
|
r3acer
Joined: 02 Mar 2014 Posts: 3
|
Posted: Sun Mar 02, 2014 12:08 pm Post subject: |
|
|
Replaced the existing file under RDF folder, but still no dice...
The interesting thing is that JP1xTEST.exe correctly identifies my remote:
jp1xtest version 0.00
*** FOUND A JP1.2/3 COMPATIBLE REMOTE ON COM4! ***
Signature is 30333033
Memory address is $0600
Memory size is $1400 (5120)
Any reason why RMIR.exe is misreading the signature as starting with 3330? |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sun Mar 02, 2014 1:15 pm Post subject: |
|
|
The Raw Download starts with AF 50, which looks like a JP1 (not JP1.2/1.3) checksum since it adds to FF and is in the first two bytes. I used a text editor to replace AF 50 with 33 30, saved that file as 3330B.ir, and it loaded fine into a 1056B01. My first reaction is that somehow the signature stored in the E2 section has become corrupted. The first 8 bytes of the Raw Download should start 33 30 33 33 33 30 33 33, and not AF 50 33 33 33 30 33 33.
I would edit 3330.ir as I did and upload that to the remote. Then I think the correct signature will stick. If not, we'll want to know which interfae cable you're using and all of the version numbers from Help\About. |
|
Back to top |
|
|
r3acer
Joined: 02 Mar 2014 Posts: 3
|
Posted: Sun Mar 02, 2014 1:26 pm Post subject: |
|
|
That worked! Thank you! |
|
Back to top |
|
|
timg11
Joined: 15 Aug 2005 Posts: 41
|
Posted: Sat Dec 13, 2014 6:21 pm Post subject: |
|
|
I have a very similar remote. I'm having trouble getting it to function properly. Some buttons work, but some seem to do nothing although I have programmed them.
JP1XTEST returns:
jp1xtest version 0.00
*** FOUND A JP1.2/3 COMPATIBLE REMOTE ON COM1! ***
Signature is 30333033
Memory address is $0600
Memory size is $1400 (5120)
The raw download looks like this:
0600: 33 30 33 33 33 30 33 33 01 FE 07 55 14 E2 25 D2
0610: 35 79 27 D0 00 04 03 FF 00 11 00 0F 0F 00 00 00
So I don't have the issue with starting with AF 50.
I have previously used the RemoteMaster Remote selection of "Atlas OCAP URC-1056 JP1.3 (Black)" with this remote.
Is there a different choice that I should use? |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sun Dec 14, 2014 3:16 am Post subject: |
|
|
Seems like that is the correct RDF to use. Have you started by doing a 981 reset manually, downloading from the remote and then adding a single upgrade? |
|
Back to top |
|
|
timg11
Joined: 15 Aug 2005 Posts: 41
|
Posted: Sun Dec 14, 2014 1:26 pm Post subject: |
|
|
It turns out that the remote is defective. The buttons in question don't work even after the 981 reset. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
Posted: Sun Dec 14, 2014 2:00 pm Post subject: |
|
|
If the some that don't work happen to be channels, numbers and OK, then you simply need to turn off cable lock. |
|
Back to top |
|
|
|