Need bin code for Strong Srt 5505 MHP Digital Terrestrial

germano77 · Post by **germano77** » Thu Dec 09, 2010 4:30 pm

1. Device: Strong SRT 5505
2. Type of device: Digitak Terrestral with slot
3. Year: 2007
4. JP1/UEI Remote model: I don't know
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Don't know what that is.
9. Partially working setup code? N/A
10. Learning remote question? need code for slingbox solo

Thankyou

Post by **vickyg2003** » Fri Dec 10, 2010 1:39 pm

We have several upgrades for Strong Set top boxes, in the file section. But none for the 5505. One of these two might be a good starting point. They use different protocols,

Strong SRT5006

Strong SRT5020

I'm going to move this conversation to the slingbox forum.

alanrichey · Post by **alanrichey** » Sat Dec 11, 2010 2:18 am

Have a go with this one

https://www.hifi-remote.com/forums/dload ... le_id=9240

germano77 · Post by **germano77** » Mon Dec 13, 2010 12:21 am

Thanks for reply Alan.
I have installed you bin files, but after I choose the filesm i have the message "Update nont found"

Bye

alanrichey · Post by **alanrichey** » Mon Dec 13, 2010 12:54 am

You can ignore that. That is the point in the process when the Remote 'skin' is downloaded. In your case you will be using the Default skin and that is already on your PC.

germano77 · Post by **germano77** » Mon Dec 13, 2010 1:29 am

Hi,
I have installed all and end the procedure,but the it's not work.
I cannot see the true IR position.
I have try work with web remote installer and it's not work too.
With digiquest work very well but I must use the Strong for the card slot.
Thanks

alanrichey · Post by **alanrichey** » Mon Dec 13, 2010 2:27 am

I'm afraid all my ideas are in the Readme file.

Have you tried http://remotes.slingbox.com ?

germano77 · Post by **germano77** » Tue Dec 14, 2010 1:33 pm

Hi,
I have solved.
I used the generic code ADB ICAN Satellitare code.

Thanks for your help.