View previous topic :: View next topic |
Author |
Message |
divxdude
Joined: 06 Sep 2005 Posts: 67
|
Posted: Fri Dec 03, 2010 12:45 pm Post subject: radio shack 15-133 |
|
|
i picked up a couple of the 15-133 remotes for .97 each.
i have device numbers and old lists of advance codes for reprogramming
the features but this new remote doesnt seems to use those same codes.
will i be able to add the features from the keyboard like i did with my other UEI product? or must use the jp1.3 ?
my previous remote was the 6131n. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Dec 03, 2010 1:16 pm Post subject: |
|
|
It does use the same codes essentially. Just prepend 00 to 3 digit EFCs. The last 4 digits of the setup codes also match your old remote. The first digit is just the device type. For example, 1377 is 01377 on the 15-133, where 0 means cable/sat. I think 1 = tv, 2 = video, and 3 = audio. That way you can easily assign any device type to any device button. |
|
Back to top |
|
|
divxdude
Joined: 06 Sep 2005 Posts: 67
|
Posted: Fri Dec 03, 2010 2:05 pm Post subject: |
|
|
my old Sony AV reciever was device 158.
tried 31158 30158 dont work.
from my new book i got 31058 and 31258 to work but both are very limited.
one extended function i need was 240.
i tried 00240 01240 30240 31240 with no luck.
my 3 digit codes are more than 10 years old. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Fri Dec 03, 2010 2:44 pm Post subject: |
|
|
I'm confused by the assertion that the AV receiver was "device 158". I think you're looking for a Setup code. 6131n Setup codes are 4 digits, so I'm not sure where 158 came from. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Dec 03, 2010 2:53 pm Post subject: |
|
|
Using setup code 31058 (not one of the others you already tried), I think 240 would now be 10445. I believe that's the same code sent when you press 4. If that works, let me know and I'll post the rest. |
|
Back to top |
|
|
divxdude
Joined: 06 Sep 2005 Posts: 67
|
Posted: Fri Dec 03, 2010 5:01 pm Post subject: |
|
|
yes 31058 is the new device.
the old was once 158, perhaps 0158 in the last remote or 2.
thank you yes 10445 replaces 240
as for what you said about"4" i did happen to have it assigned to key "4"
these 3 digit codes were sent to me from ueic back in the early 90s
when i bought a RS remote 15-1918 i think.
the i bought a couple Cinema7s and wore them out..
then some 6131n but i do believe the Sony rcvr device was some variation of 158. |
|
Back to top |
|
|
divxdude
Joined: 06 Sep 2005 Posts: 67
|
Posted: Fri Dec 03, 2010 5:05 pm Post subject: |
|
|
from UEIC support
Code: | Date: Tue, 11 Feb 1997 13:37:21 EDT
From: Brian Dean <BRIDEA@UEIC.xxx>
Subject: Re: undocumented function codes for 15-1918
Audio Amp/Tuners ----- <CD Group>
----------------------------------------------------------------------
158
240 Aux 415 Display 498 Phono 492 Tape A/B
463 Aux 412 Display Mode 627 Phono Cue 611 Titlr On/Off
645 Band 655 FM Simulcast 622 Phono Stop 238 Tuner
412 Clock Display 238 FM/AM 348 Scrn On/Off 463 TV
492 DAT 478 Function 548 Shift 384 TV
545 DAT 341 GEQ Link 341 Snd Field Li 240 Video
702 Deck Select 636 Laser Disk 670 Source Dir 465 Video 2
546 Digital 384 LD 486 Stereo/Mono 288 Video 3
291 Digital 657 Memory 621 System Off 540 Video 4
543 Digital 2 364 Mix 492 Tape 1 286 Video 5
415 Dimmer 333 MTS 243 Tape 2 243 Video/DAT
TUNER. Uses with:
GRAPHIC EQUALIZER........Misc Audio...........CD 010
SURROUND AMP.............Misc Audio...........CD 159
DSP......................Misc Audio...........CD 576 |
it goes on.. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Dec 03, 2010 7:42 pm Post subject: |
|
|
Here are all the ones from your list above:
EFC3 EFC5 - Function
240 10445 - Aux
207 01997 - Aux
133 48589 - Band
156 54477 - Clock Display
236 09421 - DAT
033 22989 - DAT
190 63181 - Deck Select
034 23245 - Digital
035 23501 - Digital
031 22477 - Digital 2
159 55245 - Dimmer
159 55245 - Display
156 54477 - Display Mode
143 51149 - FM Simulcast
238 09933 - FM/AM
222 05837 - Function
085 36301 - GEQ Link
128 47309 - LD
124 46285 - Laser Disk
077 34253 - MTS
145 51661 - Memory
108 42189 - Mix
242 10957 - Phono
115 43981 - Phono Cue
110 42701 - Phono Stop
092 38093 - Scrn On/Off
036 23757 - Shift
085 36301 - Snd Field Li
158 54989 - Source Dir
230 07885 - Stereo/Mono
109 42445 - System Off
207 01997 - TV
128 47309 - TV
236 09421 - Tape 1
243 11213 - Tape 2
236 09421 - Tape A/B
099 39885 - Titlr On/Off
238 09933 - Tuner
209 02509 - Video 2
032 22733 - Video 3
028 21709 - Video 4
030 22221 - Video 5
243 11213 - Video/DAT
240 10445 - Video |
|
Back to top |
|
|
divxdude
Joined: 06 Sep 2005 Posts: 67
|
Posted: Fri Dec 03, 2010 7:55 pm Post subject: |
|
|
apologies did you translate those each?
only need a few
but you dont have a complete list for that device? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Dec 03, 2010 8:04 pm Post subject: |
|
|
I translated from your list. The first list on THIS page has every known command for your device. Post the ones you need and I'll try to translate. Or you could get Remote Master and try to do it yourself. It's sony 12/15/20 combo with device 16. Enter the values from the sony page into the OBC column. |
|
Back to top |
|
|
divxdude
Joined: 06 Sep 2005 Posts: 67
|
Posted: Fri Dec 03, 2010 8:07 pm Post subject: |
|
|
ok hope u dont mind if move this from PM.
some noob like me can benefit from it.
thank you mdavej.
sorry for not doing my homework on the lookup tool.
mdavej wrote: | divxdude wrote: | thanks for the info.
please send more.
where do you get that? |
I just posted the rest. Getting them is a little complicated. First I used the Lookup Tool link above and found your original setup code. That told me the protocol info (sony 12/15 device 16 subdevice 13). Then I looked for something close in the 133, which turned out to be 31058 which is sony 12/15/20 combo. Using the Remote Master program from this site, I entered the protocol and device info and the old EFCs and it calculated the 5 digit ones for me.
I think they should all work, but I made some assumptions about the subdevice not being used in this case, which could be wrong. |
|
|
Back to top |
|
|
|