View previous topic :: View next topic |
Author |
Message |
bobcrane
Joined: 25 Oct 2010 Posts: 3
|
Posted: Mon Oct 25, 2010 8:23 pm Post subject: Solved! - Problems Creating/using RID for ZAT-970A |
|
|
I created and installed a RID file for my Zinwell ZAT-970A DTV Box. But the code doesn't control the box.
Here are the details:
I downloaded an RMDU for the ZAT-970A from this site.
I then used FlipFlops instructions to make a RID file using RM and RIDGen.
I copied protocol as NEC1, Device Number is 0. I did not copy Protocol ID or Sub Device info. The hex info seemed to generate fine.
It seemed to generate the file fine (s7950fi.rid).
I took the ircodes, ircodesraw, and shellcmds from an accurian.zip on AVS, modified them to include my 7950 code, and installed using DVArchive/Wirns.
I can see the code in ReplayTV but it will not run the DTV Box.
Any ideas?
Last edited by bobcrane on Tue Oct 26, 2010 12:31 am; edited 1 time in total |
|
Back to top |
|
|
bobcrane
Joined: 25 Oct 2010 Posts: 3
|
Posted: Mon Oct 25, 2010 9:09 pm Post subject: |
|
|
Should say this is for a 50x0 Replaytv |
|
Back to top |
|
|
bobcrane
Joined: 25 Oct 2010 Posts: 3
|
Posted: Tue Oct 26, 2010 12:30 am Post subject: Solved |
|
|
I found a post from Robman where the subdevice info was stripped by ridgen.
So I checked my file and sure enough it was gone.
I manually added it to each of the lines of hex, ran decodeIR to make sure it was there. Once I loaded that it works like a charm.
As a long time lurker I LOVE THIS FORUM. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Oct 26, 2010 6:00 am Post subject: |
|
|
Congratulations! _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
|