View previous topic :: View next topic |
Author |
Message |
J-Dog
Joined: 24 Sep 2013 Posts: 2 Location: FL |
Posted: Tue Sep 24, 2013 9:04 am Post subject: Need help with a custom protocol with (2) device codes |
|
|
I am working with an Insignia 67100 remote and I am trying to create a single upgrade with a custom protocol that has multiple devices. My protocol works and I have been successful in creating my desired remote with two upgrades and keymoves. What I really want to do is have one upgrade with the same protocol and two devices. I use Rm and RMIR primarily, Does anyone have any sugestions on how I could accomplish this or point me in the direction of some information I might not have found yet?
Thank you,
J-Dog |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Tue Sep 24, 2013 10:17 am Post subject: |
|
|
Lots of protocol executors are combo executors, which can send more than one device number. I suspect that is what you are looking for or are trying to write, but it isn't clear from your description. Tell us which IR protocol your equipment uses, and which device numbers are needed. That should make it easier to understand. |
|
Back to top |
|
|
J-Dog
Joined: 24 Sep 2013 Posts: 2 Location: FL |
Posted: Tue Sep 24, 2013 12:51 pm Post subject: |
|
|
3FG
Yes I believe a combo protocol is what I need I'm just not quite sure how to do it. I have uploaded a copy of my custom protocol here
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12075
and I need two devices 10 and 138.
How would I go about turning my protocol into a combo protocol?
I hope this clarifies where I'm trying to go and thanks for the assistance
JDog |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Tue Sep 24, 2013 2:23 pm Post subject: |
|
|
Well, it appears that the protocol file is 0 bytes in length. Can you also upload the original learns or IRScope file? It might help in developing a newer version of DecodeIR.dll. |
|
Back to top |
|
|
|