View previous topic :: View next topic |
Author |
Message |
ron_by
Joined: 02 Aug 2010 Posts: 7
|
Posted: Mon Aug 02, 2010 11:19 am Post subject: Thomson DCI 5211 HOT Cable Box |
|
|
1. Device: Thomson DCI 5211
2. Type of device: Cable Box
3. Year: recent (2009-2010 i think)
4. JP1/UEI Remote model: Slingbox (no JP1 or UEI remote)
5. Do you have a JP1 cable? no
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? n/a
Thanks in advance |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
|
Back to top |
|
|
ron_by
Joined: 02 Aug 2010 Posts: 7
|
Posted: Mon Aug 02, 2010 4:02 pm Post subject: |
|
|
Thanks very much.
My slingbox seems to have stopped working for some reason, so I can't test it now. But hopefully I'll get it working again tomorrow and then I'll be able to test it and see if it works. I'll report back here after I do that. |
|
Back to top |
|
|
ron_by
Joined: 02 Aug 2010 Posts: 7
|
Posted: Tue Aug 03, 2010 4:14 pm Post subject: |
|
|
Just tried it. Not working unfortunately.
No reaction at all. After the power button didn't work I went ahead anyway to check other buttons, but no luck. Playing with the placement of the IR thingies didn't do the trick either. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Tue Aug 03, 2010 4:25 pm Post subject: |
|
|
Pity. I assume you did the camera check on the blasters ?
As I said I wasn't confident as I have never managed to build a working remote with the Thomson IR protocol.
Have you checked out http://betaremotes.com to see if you build your own remote ? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Tue Aug 03, 2010 5:09 pm Post subject: |
|
|
Alan, if you load your RM file, I can take a look to see if you did anything wrong. I might also need your ICT file to compare it with. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Tue Aug 03, 2010 5:26 pm Post subject: |
|
|
Sorry, thought it was already in. Added now.
And an ICT file for Power, 1, 2 & 3. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Tue Aug 03, 2010 8:47 pm Post subject: |
|
|
Try creating a bin file using this RMDU file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1562
This one also uses Thomson with device code 3 but the OBCs are different.
Plus, there appears to be a problem with the S3C8 code in protocols.ini, I think it should be replaced with this...
Code.S3C80=76 76 11 8B 0E C5 41 05 07 00 F2 03 ED 00 F2 08 \
DE 9C 2C 76 00 01 6B 03 B6 03 08 8D 01 46 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sun Aug 08, 2010 5:23 pm Post subject: |
|
|
Any luck ? |
|
Back to top |
|
|
ron_by
Joined: 02 Aug 2010 Posts: 7
|
Posted: Sun Aug 08, 2010 6:58 pm Post subject: |
|
|
no, didn't work.
sorry not reporting back here sooner. i thought i'd go get a new IR blaster cable, just in case that's where the problem lies (though I doubt it, since i did the camera check and it seemed fine), but haven't managed to get one yet.
any idea what the problem might be? anything else i should check? |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sun Aug 08, 2010 7:21 pm Post subject: |
|
|
Afraid all my ideas are in the Readme file. So maybe we still don't have the Thomson protocol right. |
|
Back to top |
|
|
ron_by
Joined: 02 Aug 2010 Posts: 7
|
Posted: Mon Sep 06, 2010 3:01 pm Post subject: |
|
|
got a new IR blaster cable and tried again, but still no luck.
any other ideas, anyone? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Mon Sep 06, 2010 3:13 pm Post subject: |
|
|
Alan, do you have the same sling as ron-by? If so can you capture the sling output from your sling to irscope too? _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Tue Sep 07, 2010 4:09 pm Post subject: |
|
|
With great difficluty. But there is another problem now i have tried re-learning the codes and that is that some buttons decode as Thomson 3 and some as Thomson 35, and we can't use both in RM ? |
|
Back to top |
|
|
|