Computer Interface

This is the JP1 beginners forum. There's no such thing as a stupid question in here, so post away, but this forum is just for JP1 users and people considering JP1, non-JP1 users please use the appropriate forum above!

Moderator: Moderators

Post Reply
eriksond
Posts: 1
Joined: Fri Dec 12, 2003 11:35 am

Computer Interface

Post by eriksond »

I would like to build a computer serial port to IR interface
and control my Replay,TV,Sony stereo and Sat rcvr with
sofware running on XP. Also have a learn mode to this interface. Anyone with experience on such a project?
jon_armstrong
Expert
Posts: 1238
Joined: Sun Aug 03, 2003 9:14 pm
Location: R.I.P. 3/25/2005
Contact:

Post by jon_armstrong »

Take a look at http://winlirc.sourceforge.net/

Now, a question for you: Why do you want your computer to control this equipment, when you can easily do it with a JP1 remote?

The reason I ask, is that I have a home automation system running on a PC that can learn IR, transmit IR commands, trigger events based on IR commands received, sense voltage or current, contact closures. It can be triggered by voice commands, DTMF tones from a phone, by sending an email, and on and on.

I used this system for things like sensing whether the TV was on before I sent a power toggle command. Once I learned about discrete IR commands and JP1 remotes and a little selective equipment replacement, I now control everything with a JP1 remote.

I only press one button and it turns on and off the right equipment, sets all the av inputs and can set lighting all. My reliability has gone way up.
-Jon
Post Reply