JP1 Remotes

Thanks!

By any change, you still have the code for A. C. Ryan PV-73100? Someone from the A. C. Ryan forum had asked me about it. I can't find it from the download section anymore. If I don't remember it wrong, the file id was #8201. You uploaded the file way back in March. Sorry to bother you again. If you don't have it, that is fine. I will search my old archive and see if I can find it. Too bad, the beta remote link is down. Otherwise, I can ask him to use the link to create one.

Thanks,

Johnny

I took it down as it was never proven. Back up now at

https://www.hifi-remote.com/forums/dload ... le_id=8841

Please ask him to confirm if it works or not,.

Thanks!

Johnny

Do you have an RMDU file for it also?

Yes. I was going to upload it once the Remote was proven to work. I know we have discussed this before but I still remain wary of putting something out in the public domain that hasn't been show to be correct.

Al

Here are the two options as I see it:

1) leave the unproven file in the file section, with a message stating that it's untested, then when a future user tries it they can either post that it works or it doesn't.

or

2) delete the file, in which case that future user won't find it and won't be able to test it and won't be able to confirm whether it works or not. In fact, that future user might not even find us as there won't be a reference to the file.

As I've said many times, my preference is option 1, because having some information is always better than having none. That's one of the reasons that I changed the file settings so that files can no longer be deleted from the Slingbox section.

OK, I am beaten to the ground in abject submission

From now on I will use Option 1 and never delete a file simply annotate it as 'unproven'. I have about 100 of them on my computer, I'll drip feed them back as I get a few min spare.

Did you get my PM about the Axum RDF ?

Cheers

Al

I have reverse engineered an RM file for this device here:
https://www.hifi-remote.com/forums/dload ... le_id=8845

tanww888 wrote:By any change, you still have the code for A. C. Ryan PV-73100? Someone from the A. C. Ryan forum had asked me about it.

Any feedback from him ?

Just got a feedback from the user last night. He said it works for him.

Thanks!

Johnny

Thanks, I'll flag it as 'proven'

Cheers

Al

Could you load the proper RM version, if you get a chance, as my file doesn't have good function names as I reverse engineered it from your bin file. You can overlay my file above if you like.

I already had

I re-downloaded my RM file and it hadn't changed, so I did a search and found Alan's file...
https://www.hifi-remote.com/forums/dload ... le_id=8897

Sorry, my fault. I always have trouble deciding where to put Upgrade files when I don't know what a device actually does.