Page 1 of 1
Can macros be assigned to SHIFT-<number> on URC 6131?
Posted: Mon Sep 29, 2003 3:15 pm
by PeterSteele
I used IR to define some macros for my URC 6131 remote and the ones I bound to SHIFT-1 and SHIFT-2 don't seem to work. I basically defined the same macros for SHIFT-PVR and SHIFT-CBL/SAT and these worked fine. Any reason why these other keys wouldn't work the same way?
Posted: Mon Sep 29, 2003 3:34 pm
by jamesgammel
If it's like most other ueic remotes, to invoke the shift commands on numeral keys requires a double press of the "shift" key. Example: on shift-play you would press "setup, play". However, on numerals, you need to press "setup, setup, 'one' " Double hit the setup key (aka shift) before the numeral key and see if it doesn't then kick in.
Jim
shift key
Posted: Mon Dec 01, 2003 10:29 pm
by txs
What key is used as the shift key in the URC-6131?
Posted: Mon Dec 01, 2003 11:30 pm
by Mark Pierson
The 6131 shift button is "Set".
In almost ALL JP1 remotes, "shift" is the same button used for "setup", such as:
Set, Setup, P, * (star), Magic