JP1 Remotes

alanrichey · Expert Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA

For Rob really:

The 'No Repeat' version of the NEC1 protocol has been very successful and I have managed to help a lot of people on the Sling forum. Now someone with the G.I.Cable protocol has asked for a no-repeat version.

Any chance you could do it or tell me which byte to change ?

Cheers

Al

The Robman · Posted: Fri May 13, 2011 12:58 pm Post subject:

Here's the standard GI Cable executor code:

Upgrade protocol 0 = 00 C4 (S3C8+) GI Cable (PB v4.02)
43 8B 01 8B 12 CC 4D 00 08 00 FA 08 B6 00 FA 04
51 C3 3C 11 94 08 B6 20 11 08 03 F6 FF 36 08 04
F0 C0 56 C0 F0 04 04 C0 60 C0 56 C0 F0 06 C0 10
F6 FF 36 8D 01 46 1C 08 C0 C0 10 04 1A FA AF
End

To make it stop repeating, all you need to do is change 7th byte from $4D to $4C, like so...

Upgrade protocol 0 = 00 C4 (S3C8+) GI Cable (PB v4.02)
43 8B 01 8B 12 CC 4C 00 08 00 FA 08 B6 00 FA 04
51 C3 3C 11 94 08 B6 20 11 08 03 F6 FF 36 08 04
F0 C0 56 C0 F0 04 04 C0 60 C0 56 C0 F0 06 C0 10
F6 FF 36 8D 01 46 1C 08 C0 C0 10 04 1A FA AF
End
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

vickyg2003 · Posted: Fri May 13, 2011 1:10 pm Post subject:

Rob, I think Alan will want entries for his special Slingbox-Protocols-ini like you did for the non-repeating Nec that you had set up before.

Hmm, the board has been sooooo slowwww and I still missed this post from Alan.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.

The Robman · Posted: Fri May 13, 2011 4:22 pm Post subject:

Do you have time to do all that stuff for him?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

vickyg2003 · Posted: Fri May 13, 2011 4:26 pm Post subject:

I don't know how, but if you are pressed for time, I'll look up to see how you did it with the Nec1 protocol.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.

The Robman · Posted: Fri May 13, 2011 6:52 pm Post subject:

Here ya go...

[GI Cable (no repeats)]
PID=00 C4
CmdTranslator=Translator(lsb)
CmdParms=OBC=0
Notes=CBL/0476
Code.S3C80=43 8B 01 8B 12 CC 4C 00 08 00 FA 08 B6 00 FA 04 51 C3 3C 11 94 08 B6 20 11 08 03 F6 FF 36 08 04 F0 C0 56 C0 F0 04 04 C0 60 C0 56 C0 F0 06 C0 10 F6 FF 36 8D 01 46 1C 08 C0 C0 10 04 1A FA AF
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

alanrichey · Expert Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA

Thanks both. I've been away for a weekend with friends and managed to find an electomagnetic black hole Smile

. No internet, and no cell phone for the main 4 providers in the UK.