View previous topic :: View next topic |
Author |
Message |
bob_m
Joined: 09 Feb 2005 Posts: 80 Location: Bourbonnais, IL |
Posted: Tue Apr 13, 2010 8:01 pm Post subject: Issues trying to get back into JP1 with new hardware and pc |
|
|
* HTPRO URC-9811B00 - NO extenders
* Win XP SP3
* Tommy Tyler's Original JP1 USB eeprom plug (newly aquired)
* Current IR and RDFs
* Tried the new and 2007 drivers for above plug as mentioned here http://www.hifi-remote.com/forums/viewtopic.php?t=10146
Ran IR and loaded RDF folder and installed plug correct way - Test connection was positive
Before I did anything I TRIED to download FROM the remote my current/prior configuration and got the following error:
"It appears that the interface failed midway into the operation. This problem can occur if the interface is faulty or if the EEPROM you are trying to read is larger than $8000 (the maximum size supported by IR)."
I've never seen this before or had this problem with old Parallel port plug on older XP machine.
Looking for some trouble shooting
A) PC
B) Software
C) Remote
D) Plug _________________ HTPRO x 5 - UEI-9811B00
Last edited by bob_m on Tue Apr 13, 2010 10:25 pm; edited 1 time in total |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Apr 13, 2010 8:57 pm Post subject: |
|
|
Start with new batteries. The USB style interface is dependent on the remote's batteries. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
bob_m
Joined: 09 Feb 2005 Posts: 80 Location: Bourbonnais, IL |
Posted: Tue Apr 13, 2010 9:27 pm Post subject: |
|
|
vickyg2003 wrote: | Start with new batteries. The USB style interface is dependent on the remote's batteries. |
NO luck... I can try more batteries later
FYI: Tried a BRAND NEW remote fresh out of box with 2nd set of batteries (not original) and same error.
UPDATE 2: Brand New batteries in Brand new remote = same error... _________________ HTPRO x 5 - UEI-9811B00 |
|
Back to top |
|
|
jimdunn
Joined: 29 Jun 2004 Posts: 544 Location: NSW, Australia |
Posted: Tue Apr 13, 2010 10:27 pm Post subject: |
|
|
In this thread:
http://www.hifi-remote.com/forums/viewtopic.php?t=10127&highlight=
the same problem seems to have been solved with the 2006 drivers
st5000 wrote: |
I downloaded all three and tried the oldest one first. That work! Go figure, maybe Delcom has been busy trying to get things working with Vista? I'm fat and happy now, but if you need to know, I can try the other drivers when I have more time.
...thanks! |
|
|
Back to top |
|
|
bob_m
Joined: 09 Feb 2005 Posts: 80 Location: Bourbonnais, IL |
Posted: Tue Apr 13, 2010 10:36 pm Post subject: |
|
|
So I don't do this wrong... how do i unistall the curent one? or just install the new one?
Scratch that... updating backwards now... _________________ HTPRO x 5 - UEI-9811B00
Last edited by bob_m on Tue Apr 13, 2010 10:50 pm; edited 1 time in total |
|
Back to top |
|
|
jimdunn
Joined: 29 Jun 2004 Posts: 544 Location: NSW, Australia |
|
Back to top |
|
|
bob_m
Joined: 09 Feb 2005 Posts: 80 Location: Bourbonnais, IL |
Posted: Tue Apr 13, 2010 10:56 pm Post subject: |
|
|
Thanks I posted to fast and reposted to slow
Currently Have 2006 drivers...
New Error:
The EEPROM size detected by IR ($1000) is incompatible with the value specified in the RDF ($800). IR will use the detected value, but if this is incorrect, then uploading to the remote will cause the EEPROM data to become corrupt. Please confirm the size of the EEPROM in your remote before proceeding.
Once again this is the NEW remote with NEW batteries.
I hit ok and so far so good...
DL'ed from a programmed remote (no extenders). It seems to be successful.
Its a little late and I'm a bit loopy but Hopefully the above error is minor... _________________ HTPRO x 5 - UEI-9811B00 |
|
Back to top |
|
|
bob_m
Joined: 09 Feb 2005 Posts: 80 Location: Bourbonnais, IL |
Posted: Tue Apr 13, 2010 10:57 pm Post subject: |
|
|
OH and thanks! _________________ HTPRO x 5 - UEI-9811B00 |
|
Back to top |
|
|
jimdunn
Joined: 29 Jun 2004 Posts: 544 Location: NSW, Australia |
Posted: Tue Apr 13, 2010 11:46 pm Post subject: |
|
|
You shouldn't get that error message.
First be sure you're using the latest IR versions and RDFs.
As far as I can tell, your HTPRO should have $800 as EEPROM size, and it should be using this RDF:
Code: | CPT0CPT0 (URC-8910(Old)_9910(Old)_8910(New)_9910(New)_HTPro).rdf |
For some reason IR is detecting a $1000 size EEPROM
You can see if it's caused by a corrupt EEPROM by doing a Manufacturer Reset, which may fix it.
Make sure you download and save your Setup first, as this will wipe the remote clean !!!
Instructions here: http://www.hifi-remote.com/forums/viewtopic.php?t=4057
If the problem persists, upload your IR file in the diagnosis section.
If you could also do a separate "RAW" download of the remote (after a MFR reset), that might help an expert see what is going on with this download.
In IR, select Advanced>Enable Raw Download and then download the remote and upload both this file and the file you saved above to the diagnosis area:
http://www.hifi-remote.com/forums/dload.php?action=category&cat_id=35
by using the "Upload" icon.
(don't forget to deselect Advanced>Enable Raw Download afterwards in IR)
Then post a link to the uploaded file(s) back here, so someone can take a look. |
|
Back to top |
|
|
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Sat Apr 17, 2010 3:56 pm Post subject: |
|
|
bob_m,
could you please describe your XP computer with lots more detail to compare notes. Make, model, processors - one, two, more?, what USB ports, what USB (1 or 2), and anything else you can think might be useful. _________________ Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sat Apr 17, 2010 4:43 pm Post subject: |
|
|
I am particularly interested in whether your computer uses the Open Host Controller or the Universal Host Controller for USB.
Please do Start, right click on My Computer, select Properties, Device Manager, and scroll down to the USB controllers. You should one or the other (although if you have added a PCI card both could be present), and an Enhanced Controller. The Enhanced Controller doesn't matter. |
|
Back to top |
|
|
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Sun Apr 18, 2010 10:50 am Post subject: |
|
|
bob_m,
You mentioned using "* Tommy Tyler's Original JP1 USB eeprom plug (newly aquired)"
It's not 100% clear to me what this means.
The little plug is designed to use the JP1.2 or JP1.3 cable. Designed for flash remotes, but with the little plug is used for JP1 eeprom remotes. That cable+plug combo uses FTDI driver.
Tommy originally had a USB cable for JP1 remotes which used the Delcom drivers. I hope you're not mixing the two. _________________ Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
Back to top |
|
|
bob_m
Joined: 09 Feb 2005 Posts: 80 Location: Bourbonnais, IL |
Posted: Wed Apr 21, 2010 2:44 pm Post subject: |
|
|
ElizabethD wrote: | bob_m,
You mentioned using "* Tommy Tyler's Original JP1 USB eeprom plug (newly aquired)"
It's not 100% clear to me what this means.
The little plug is designed to use the JP1.2 or JP1.3 cable. Designed for flash remotes, but with the little plug is used for JP1 eeprom remotes. That cable+plug combo uses FTDI driver.
Tommy originally had a USB cable for JP1 remotes which used the Delcom drivers. I hope you're not mixing the two. |
Tommy originally had a USB cable for JP1 remotes which used the Delcom drivers.
THIS is what I recently aquired.
I'll post the other info for people when I get a chance.
Asll seems to be working with the oldest delcom drivers suggested on this site. _________________ HTPRO x 5 - UEI-9811B00 |
|
Back to top |
|
|
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Wed Apr 21, 2010 7:35 pm Post subject: |
|
|
Very good, thanks. So it's the Delcom-interface cable not the JP1.2/3+eeprom plug.
Good to hear it's working for you.
Now, can you please post your USB description soon. It's simple, just right click My Computer > Properties > Hardware > Device manager
Find USB section at the bottom and post a screen shot over at image shack or as a document in the Diagnosis area here. _________________ Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
Back to top |
|
|
bob_m
Joined: 09 Feb 2005 Posts: 80 Location: Bourbonnais, IL |
Posted: Wed Apr 21, 2010 10:37 pm Post subject: |
|
|
Here is a list of what is found under
Universal Serial Bus Controllers
- Delcom USB IO Driver
- Generic USB Hub (x2)
- Standard Enhanced PCI to USB Host Controler
- Standard OpenHCD USB Host Controller
- USB Composite Device (x2)
- USB Root Hub (x2)
- USB Serial Converter
Have JP1 USB, IR widget and an external hub plugged in atm and my cell phone.
Not sure if this helps - never had anyone ask this before
XP SP3
Intel Core2 Duo
E8500 @ 3.16hz
3.17 GHz, 2.75 GB of Ram
I do get a few random connection error, but I'm use to that from my old parallel port cable - And I'm using the older JP1 USB Delcom plug _________________ HTPRO x 5 - UEI-9811B00 |
|
Back to top |
|
|
|