Denon 3808A: Discrete commands for Audyssey dynamic EQ/Volum

If you already have a working setup code or upgrade, but are looking for discrete codes (for power, inputs, etc), please post here.

Moderator: Moderators

Post Reply
Barf
Expert
Posts: 1523
Joined: Fri Oct 24, 2008 1:54 pm
Location: Munich, Germany
Contact:
Contact Barf

Denon 3808A: Discrete commands for Audyssey dynamic EQ/Volum

Post by Barf »

I stumbled upon this thread on Remotecentral, containing discrete codes for Audyssey dynamic volume settings. DecodeIr reveals that this is denon_k, device 4, subdevice 1, commandnumbers 749, 750, and 748 respectivelly. Fumbling around, I found discrete commands for the dynamic EQ(-ualization) and volume (command numbers 745,746, 747).

(The functionallity was added in a software update in the end of 2008. Although lots of IR command are documented at Denon's site, these, added in the upgrade, appear not to documented.)

Summarizing:

Device: Denon AVR-3808A, almost surely also 4308A, probably also others with Audyssey. Protocol: denon_k, device: 4, subdevice: 1
Command numbers (OBC):
  • 745 Audyssey Dyn Vol/EQ ON
  • 746 Audyssey Dyn EQ ON
  • 747 Audyssey Dyn Vol/EQ OFF
  • 748 Audyssey Dyn Vol Midnight
  • 749 Audyssey Dyn Vol Evening
  • 750 Audyssey Dyn Vol Day
I do not know if there are serial/IP-equivalents of these, probably...
Top
Post Reply

Return to “Discrete Codes”