JP1 Remotes

Hi,

I need help with the codes for a cable dvr motorola 1232e, i tryied every thing (vip1200 and vip200) at the slingbox setup and nothing. I checked the ir's and they are working.

Thank you.

Are you sure about the Model Number ? I could not find a 1232e on the Logitech database that I use for my Harmony Universal remote and a Google search for Motorola 1232 only returns cell phones.

Closest I could find was a Motorola 1212 and unfortunately for you I can confirm that, like most Motorola boxes, it uses the same codes as the VIP 1200.

Have up experimented with moving the blasters around ?

Tried with my logitech universal and VIP 1200 doesnt work with the box, but it does have the codes for the digital box motorola 1232E. How do i get the codes for the slingbos from the logitech universal 525?

You can't. You need to go through the normal learning procedure as you would with your normal remote.

But now that the 1232E has appeared on the Logitech database i can do it for you. I've uploaded a Test Remote at http://www.hifi-remote.com/forums/dload ... le_id=8265

Give it a try and let me know how you get on.

Al

Alan, your RDMU file reference the TDC protocol. I know that DecodeIR decodes the TDC protocol, but I don't know what the protocols.ini needs to handle this protocol. Could you tell me what your Protocol.ini settings are for this?

[TDC]
PID=01 EE
DevParms=Variant:TDC-38|TDC-56,Device:5=10,Sub Device:5=26
DeviceTranslator=Translator(0,1,7) Translator(1,5,1) Translator(2,5,8)
CmdParms=OBC:7=0
CmdTranslator=Translator(0,7)
FixedData=A8 D0
Notes=There are two variants of this protocol, TDC-38 and TDC-56. The choice is made with the Variant \
parameter on the protocol setup page.
Code.HCS08=20 17 23 46 21 86 81 10 06 07 00 9D 00 9D 00 9D 00 9D AD D4 FF FF FF FF 05 01 60 0F 45 18 2F 35 A7 A6 6A B7 6D B7 6F B7 71 B7 73 CC FF 5C
Code.S3C80=44 8B 21 8B 14 86 81 10 06 07 00 9D 00 89 00 9D 00 89 AD D4 FF FF FF FF 05 18 03 37 10 0E C6 0E 2D 5D 1C 6A 19 15 19 17 19 19 19 1B 8D 01 49

thanks

It Worked!!!Thank you very much......

Good, I'll move it to the Slingbox Binary File section.

Cheers

Al

And I've put a copy of the RM file in the regular Cable folder:
http://www.hifi-remote.com/forums/dload ... le_id=8270

I'd put it in the PVR folder. Can't do a thing right

Oops, is it a PVR? I just assumed it was a cable box. I did search first but didn't find the regular file.

I think the difference these days between a PVR and a Cable/Satellite box are becoming very blurred. If the Play/Pause functions are defined I tend to treat it as a PVR. Having said that it's probably safer to have it in both.