JP1 Remotes

Hi,
does anyone know what's the IR Code for
TechniSat DIGIT K3Xe(Digital Cable Receiver) remote control ?
I need it for slingbox.
Some pics of receiver&remote if it helps:




Thanks!

I've put a temporary test remote at https://www.hifi-remote.com/forums/dload ... le_id=8168

Give it a try and let me know how you get on.

Thanks a lot ! it works like a charm (tested it remotely, I'll fully test it when I get @home)!

Works fine !
How did you get bin files so fast ?

Thanks again!

See http://www.slingcommunity.com/article/3 ... ingPlayer/

Yes, but I didn't find binary file (Section 3 - Obtaining the Binary file for the Custom Remote) on any of those listed sites. And You probably didn't have original remote, to learn other remote (harmony,etc...).

One more question about remote. Are those color buttons also available (green,red,yellow,...) in this binary ?

You're right, but I load the device onto my Harmony Universal Remote and use that to 'mimic' the original remote, learning the codes with the IR Widget.

And the colour buttons are mapped, do you not have them on your virtual remote ? (They appeared on Slingplayer during V2.0.3)

If you are using something else they will show up as Custom 22-25.

Al

Hi,
any chance, that you still have that remote file somewhere ? My slingbox crashed, lost all settings

Lukapple wrote:Hi,
any chance, that you still have that remote file somewhere ?

Have you tried this file?

https://www.hifi-remote.com/forums/dload ... le_id=8170

It's in the File section under Slingbox files

https://www.hifi-remote.com/forums/dload ... le_id=8170

I'll try it, thanks for link !