View previous topic :: View next topic |
Author |
Message |
alpibucky
Joined: 21 Feb 2010 Posts: 5
|
Posted: Sun Feb 21, 2010 11:31 am Post subject: all in one urc-7510 JP1 |
|
|
Hello,
Is this remote JP1 ready ? In other words is it sufficient to put a 6 pin connectors in the remote in order to be able to program it ? Is it then JP1 or JP1.2 or...
With kind regard, |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Sun Feb 21, 2010 12:01 pm Post subject: |
|
|
Never heard of it. Do you have any more information (pics, instructions, etc.)? I can tell you the 7525 has pins already and is JP1.3. I don't know if it's related to the 7510 or not. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Feb 21, 2010 12:04 pm Post subject: |
|
|
I have no idea, nobody's tried before. Does it have a spot for a 6-pin connector? It's possible that it's missing a couple of other parts too, like a resistor or capacitor, so you'd need to examine the PCB to see if there are any vacant spots. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
alpibucky
Joined: 21 Feb 2010 Posts: 5
|
Posted: Tue Feb 23, 2010 3:02 pm Post subject: |
|
|
I opened it and I found missing items as C11, U2, C4 and C5.
On the board self I can read :
07510-003-0010
REV: B
WEIS-09659/09658
URC-7510B00/B01.
The remote can read barcodes
With kind regards |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Tue Feb 23, 2010 3:20 pm Post subject: |
|
|
Here are the manuals, if anyone is interested:
URC-7510
Barcodes
That's pretty cool. The barcodes for all the setup codes are printed in the manual, so all you do is scan them rather than enter numbers on the keypad.
We still don't know if it has a place for a connector. Can you post pictures? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Tue Feb 23, 2010 7:24 pm Post subject: |
|
|
alpibucky wrote: | I opened it and I found missing items as C11, U2, C4 and C5. |
The U2 spot is for an EEPROM, so that would need to be added. The "C" spots are for capacitors, which would also need to be added. Is there also a spot for a 6-pin JP1 connector?
We would probably need to see a photo of the PCB that clearly shows the vacant spots in order to tell you what capacitor values that you will need, but for the EEPROM a 2k "16 bit" chip like a 24C16 is what you need.
When you're ordering the parts, remember to get surface mount parts and you'll need to judge the physical size of part needed for the capacitors. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
alpibucky
Joined: 21 Feb 2010 Posts: 5
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Wed Feb 24, 2010 6:47 pm Post subject: |
|
|
Neither of those pics show the vacant spots on the PCB, we need to see the other side of the PCB. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
alpibucky
Joined: 21 Feb 2010 Posts: 5
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Feb 25, 2010 3:21 pm Post subject: |
|
|
Hopefully that is clear enough for the experts to identify what parts you need.
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
alpibucky
Joined: 21 Feb 2010 Posts: 5
|
|
Back to top |
|
|
Tommy Tyler Expert
Joined: 21 Sep 2003 Posts: 412 Location: Denver mountains |
Posted: Thu Feb 25, 2010 4:49 pm Post subject: |
|
|
C4 and C5 are loading capacitors for the ceramic resonator, the component on the other side of the board near the bottom edge that is marked "Y1". Some resonators have those capacitors built-in (they each connect to ground) and you can't tell the difference by looking at them. The fact that there are no capacitors in those two positions means that they ARE built-in on your remote. So you don't need to add them.
C11 is to filter noise on the voltage supply to the EEPROM chip, and can be either 0.1MFD or .01MFD, ceramic capacitor, type SMD (surface mount) size 0805 (.080" x .050"). |
|
Back to top |
|
|
Mike-C
Joined: 04 Dec 2005 Posts: 20
|
Posted: Thu May 27, 2010 8:36 am Post subject: |
|
|
Yes, this remote is (almost) JP1 ready.
I soldered in a 24AA16 EEPROM, a 1uF in C11 and reset the remote via Magic 981. The red LED flashed 4 short flashes showing it had seen the EEPROM.
The signature of the remote is 1BC01BC0 and the bytes that got updated were $000..$011 and $100..$107 :
$000 : C6 39 31 42 43 30 31 42 43 30 02 2C 10 00 00 00
$010 : 00 00
$100 : 01 06 01 06 01 06 00 00
All other bytes were left as $FF.
Of course, you'll still need a suitable RDF file for it... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu May 27, 2010 1:04 pm Post subject: |
|
|
I have added a map and an image to the RDF zip file, but they don't work in RM. I can't see anything wrong with the RDF, so someone else will need to tell us why RM blows up when you try to use this RDF. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|